Compatible with SoftPLC Corporation's Tealware I/O system, also Mirle Corporation's FAMA product line.


System Features:

A complete range of I/O modules are available for the Tealware  system - digital, analog, and specialty modules. Many common features of all modules make the system robust, and simplify installation and maintenance.  A wide variety of configuration options are possible including high speed local I/O and remote/distributed Ethernet I/O configurations.
  • Detachable front-end terminal block for easy module replacement without re-wiring (some modules utilize a wiring cable connection, which is also easily detachable)
  • Front Panel LED display for status monitoring/troubleshooting
  • High noise immunity
  • Automatic Configuration - Module addressing based on location (not DIP switch) for easy system configuration & maintenance (manual configuration option also available)
  • Most modules are hot swappable under power
  • Low power consumption means all module configurations are possible - no power calculations required

System Specifications:

All Tealware components conform to the general specifications below:

  • I/O Module Dimensions
 141 x 38 x 110 mm, 5.5 x 1.5 x 4.3 in (H x W x D)
  • Power Supply Module Dimensions
 141 x 55 x 110 mm, 5.5 x 2.2 x 4.3 in(H x W x D)
  • I/O Rack Dimensions
 I/O Base06 (6 modules + P/S) 141 x 345mm (5.5 x 13.6in)
I/O Base08 (8 modules + P/S) 141 x 421mm (5.5 x 16.6in)
  • External Connections
 20-screw Terminal Block Connector, max wire size #14 AWG
or
D-sub connector to cable (Cat No HDIO-CBL)
  • Operating Temperature
 -20 to 70°C, -4 to 158°F
  • Ambient Storage Temperature
 -40 to 85°C, -40 to 185°F
  • Recommended Airflow Clearance
 50.8mm (2 inches) above and below unit for ambient airflow
  • Humidity
 5 to 95% non-condensing
  • Electrical Noise Immunity
 1,500 volts peak to peak, 1 µs noise width at 30 to 100Hz
  • Vibration Resistance
 10 to 55Hz, amplitude 0.075mm for 60 minutes
  • Shock Resistance
 10g 3 times 3d directions
  • Dielectric Withstand Voltage
 1500VAC for 1 minute across AC external terminals & ground
  • Impedance
 75 MOhms at 500VDC
  • Electrical Safety
 Class 2 protection
  • Operating Atmosphere
 Non-corrosive atmosphere, with minimum dust
  • Certifications & Compliances
 UL, UL(C), CE rated