Premium Poplar 8/4 Lumber Board With Free Shipping | 20 Board Feet
Poplar
Yellow poplar, also known as tulip poplar, is a species of tree found in the Eastern United States. The wood from this tree is often used for furniture, cabinetry, and flooring due to its light weight, straight grain, and uniform texture. However, yellow poplar wood is not considered a high-quality lumber, as it is prone to warping, checking, and splitting, and has a tendency to be soft and weak. It is also not rot-resistant. Despite these limitations, yellow poplar can still be a suitable choice for certain indoor or structural uses.
Common Names : Poplar, Tulip Poplar, Yellow Poplar
Scientific Names : Liriodendron tulipifera
Distribution: Eastern United States
Janka Hardness: 540 lbf (2,400 N)
| LENGTH | 75" to 85" (Inches) |
|---|---|
| WIDTH | 6" to 8" (Inches) |
| THICKNESS | Nominal Thickness 8/4 (Planning/smoothing process removes some thickness) |
| KILN-DRIED? | Yes |
| MOISTER CONTENT | 6% to 8% |
| GRADE | Select & Better |
| PACKAGE | 20 Board Feet |
Exotic Wood Zone offers some of the finest Exotic Woods and American Hardwood Lumbers. These Hardwood Lumbers are consistently dried to a moisture content between 6-8% and properly conditioned.
About Lumber Sizes
Width: 6" to 8"
Price shown is for a random selection of widths within this range. If you need custom widths, please contact us. (We also providing straight edge rip for free)Length: 75" to 85"
This is the range of lengths that we might have in stock.Thickness: 2"
Also known as 8/4,Due to shipping cost, we will not ship over 7 ft in Length.
If you need more than 50 board feet, feel free to contact us. We are happy to serve you better for 100% satisfaction.
Our products are defect-free and we guarantee 100% product satisfaction. We are happy to answer your queries to serve you better.
What Is Surface Finishing/Planing?
Rough Edges - The edges are rough cut and both surfaces will be unplanned.
SLR1E (straight line ripped one edge )- one edge is ripped straight.
SLR2E (straight line ripped two edges)- two edges is ripped straight.
S2S - The board has been run through a planer producing two flat faces, but the edges are left rough.
S3S - The board has been surfaced S2S first, then one edge is ripped straight (also known as SLR1E or straight line ripped one edge).
S4S - The board has surfaced on both faces (S2S) and received a rip on both edges, resulting in a board with two flat and parallel faces and two flat and parallel edges. This is the stuff you usually find for sale in the hardwood section of big box stores like Home Depot and Lowes.
Note: Planing will reduce the total board feet you receive slightly.
WE ARE PROVIDING ALL THESE FINISHINGS FOR FREE!
Shipping Policy
Shipping is Free In Contiguous USA
- Shipment is done within 24 hours of receipt of payment
- NO Free international shipping
- FYI free shipping is offered only within the USA
keywords
Poplar lumber boards, Poplar cutting board, Poplar boards, Poplar lumber for sale, Poplar lumber