Rustins Blackboard Black
Type A dense black paint, formulated using water-based acrylic resin.
Intended Use For blackboards, notice boards and photographic work.
Special Features
Quick-drying, low odour. Clean brushes in water. Conforms to Safety of Toys
Regulations BS EN 71 Part 3 1995.
Preparation
The surface must be clean, smooth, sound, dry and free from wax, dust and contaminants.
May be applied to bare wood, in which case 2 or 3 coats may be necessary to obtain the
required film thickness. Existing coatings should be cleaned with Rustins Surface Cleaner,
White Spirit, detergent or sugar soap and sanded lightly to provide a key prior to painting.
Application Stir well before use, using a synthetic fibre brush. Apply liberally and evenly.
Coats 1 or 2 coats as required.
Drying Time Touch-dry in 30 minutes.
Re-coating Time Allow 6 hours between coats, depending upon temperature and humidity.
Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Maintenance When heavily covered with chalk dust, wipe with a damp cloth or sponge.
Compatibility May be applied over solvent and acrylic paint.
Settlement STIR WELL BEFORE USE. Otherwise it may dry with a satin or slightly gloss finish.
Shelf-life/Storage
Many years if stored in original tightly closed container in normal conditions. Do not store
below 5°C. Protect from frost.
Hazards
Non-flammable. Nil flashpoint. Avoid contact with eyes and skin. In case of contact with
eyes, rinse immediately with plenty of water and seek medical attention. After contact with
skin, wash immediately with plenty of soap and water or a proprietary skin cleanser. Use
only in well ventilated areas.
Keep out of reach of children.
Clean-Up
Clean brushes and hands immediately after use with water. Hard brushes may be cleaned
with Rustin’s Brush Restorer.
Tin Sizes
125ml, 250ml, 500ml, 1 L

Please Select Size Required From Menu


FAST DISPATCH!
required film thickness. Existing coatings should be cleaned with Rustins Surface Cleaner, White Spirit, detergent or sugar soap and sanded lightly to provide a key prior to painting. Application Stir well before use, using a synthetic fibre brush. Apply liberally and evenly. Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity. Settlement STIR WELL BEFORE USE. Otherwise it may dry with a satin or slightly gloss finish. Many years if stored in original tightly closed container in normal conditions. Do not store Non-flammable. Nil flashpoint. Avoid contact with eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical attention. After contact with skin, wash immediately with plenty of soap and water or a propri
required film thickness. Existing coatings should be cleaned with Rustins Surface Cleaner, White Spirit, detergent or sugar soap and sanded lightly to provide a key prior to painting. Application Stir well before use, using a synthetic fibre brush. Apply liberally and evenly. Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity. Settlement STIR WELL BEFORE USE. Otherwise it may dry with a satin or slightly gloss finish. Many years if stored in original tightly closed container in normal conditions. Do not store Non-flammable. Nil flashpoint. Avoid contact with eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical attention. After contact with skin, wash immediately with plenty of soap and water or a propri