New

Interlogix  IFS VT1001-R3

Dual Video Transmitter,

Multimode, 850nm, Rack Mount

The IFS VT1001 Series dual video transmitter provides transmission of two independent xed video signals in one module utilizing AM modulation on two independent multimode ber optic cables. The module is not a multiplexer. The module is ideal for smaller CCTV installations and the rack-mount version can be used to double the xed video capacity of the R3 rack for up to 28 independent video channels per card cage. The VT1001 is compatible with the IFS VR1000, VR1001, VR1100, and VR2100 Series receivers. Plug-and-Play design ensures ease of installation requiring no electrical or optical adjustments. The module incorporates a power and channel A and B sync detect status indicating LEDs for monitoring proper system operation. The module is available in either stand-alone or rack mount version.

Features:

·         Multimode

·         850nm Wavelength

·         Rack Mount

·         AM Video Transmission

·         NTSC, PAL, SECAM Compatible

·         Full Color Compatibility

·         Two Independent Transmitters in One Module

·         Can be Used to Double the Fixed Video Capacity of an R3 Card Cage

·         No In-eld Electrical or Optical Adjustments Required

·         Power and Sync Detect Status Indicating LEDs to Monitor System Performance

·         Distances up to 2.5 miles (4 km) without Repeaters

·         Automatic Resettable Fuses on all Power Lines

·         Hot-Swappable Rack Modules

 

Specifications:

·         Video Input: 1 volt pk-pk (75 ohms)

·         Bandwidth: 5 Hz - 10 MHz

·         Differential Gain: <5%

·         Differential Phase: <5

·         Tilt: <1%

·         Signal-to-Noise Ratio (SNR): >60 dB typical, 54 dB minimum

·         Wavelength: 850 nm, Multimode

·         Receiver Sensitivity: 1 w (-30 dBm)

·         Number Of Fibers: 2

·         Connectors: Optical: ST; Power: Terminal Block with Screw Clamps; Video: BNC (Gold Plated Center-Pin)

·         Power: 12 VDC @ 150 mA; Rack: From Rack

·         Number of Rack Slots 1

·         Current Protection: Automatic Resettable Solid-State Current Limiters

·         Circuit Board: Meets IPC Standard

·         Size (in./cm.) (LxWxH): Surface Mount: 7.0 x 4.9 x 1.0 in., 10.7 x 8.9 x 2.5 cm; Rack Mount: 7.7 x 5.0 x 1.0 in., 17.8 x 12.5 x 2.5 cm

·         Shipping Weight: < 2 lbs./0.9 kg

·         MTBF: > 100,000 hours

·         Operating Temp: -40 C to +74 C

·         Storage Temp: -40 C to +85 C

·         Relative Humidity: 0% to 95% (non-condensing)