Our Cables are supplied cut to length with crimped end terminals fitted M6, M8, M10, M12 or bare ends as required.

OCEANFLEX Cable is a thin wall low voltage tinned wiring cable designed for use in harsh environments, the copper strands are tin plated, which makes this cable more resistant to corrosion. Ideal for use as battery starter cable on boats, cars, motorcycles, motor homes, where a high grade corrosion resistant cable is required. 

WHY CHOOSE OCEANFLEX ?

In harsh environments low voltage copper cables corrode over time, the copper oxidises turning black and in salt water environments copper forms a carbonate layer (turquoise). Both these elements cause the cable to have a decreased electrical conductivity. Eventually the cable weakens and causes electrical faults and failures.

OCEANFLEX has been specifically designed to combat these problems. The copper conductors have been tin plated so that they are highly resistant to corrosion over short or long periods of time. Whether caused by moisture, water or salt water. Therefore OCEANFLEX cables have a much greater life span compared to standard cables, which means lower repair/maintenance cost, less down time due to electrical faults and failures.

• Manufactured in accordance with ISO 6722-1:2011 (class B) 105°C.
• Suitable for 12v and 24v systems (maximum voltage 60v).
• Single insulated extra flexible battery/welding cables designed for use in tough working environments.
• Resistant to petrol, lubricating oils and diluted acids.
• Cables are printed with the specification on the insulation.
• Tinned Copper Conductors - PVC insulated -30ºC to 70ºC
• Reduced insulation gives considerable savings in weight and volume.

CABLE SIZES & SPECIFICATIONS:

16mm² (6 AWG) - 203/0.30 - Capacity 110 Amps - Overall Diameter: 8.3mm

SPECIFICATIONS

Cores manufactured to ISO 6722-1:2011 (class B) 105°C

Tinned Copper Conductors, PVC Insulated

Suitable for use at temperatures from -40ºC to 105ºC with excursions up to 120ºC

Twins and multicores PVC sheathed at 70ºC

Suitable for 12v and 24v systems (maximum 60v)

Good resistance to petrol, diesel, lubricating oils and diluted acid

Very good resistance to moisture

PVC insulation saves weight and offers good resistance to abrasion and cut through

Cables are printed with the specification on the insulation