The Times Protect LP-HBR-NMP series high performance surge arrestor series addresses applications in the 1.8MHz-100MHz spectrum that includes the 160-6 Meter Amateur Radio Bands.
Times Protect DC blocking technology employed in this gas tube design provides optimum isolation of the antenna port from the protected equipment port for maximum surge protection.
LP-HBR-N series surge protectors have exceptional RF performance and are constructed from the highest quality materials for unsurpassed durability and longevity. They equal or surpass all applicable industry standards.
The LP-HBR-NMP is available with an N Male connector on protected side and an N Female connector on surge side.
Impedance | 50 Ohms |
Frequency Range | 1.8 MHz – 100MHz |
VSWR/Return Loss | <1.06:1 / <-30dB |
Insertion Loss | < 0.1dB |
Power Handling – Average | 2000 Watts |
Maximum Peak RF Voltage | 4400 Volts |
Maximum Surge Current | 20kASingle Strike |
Multiple Strikes | 10kA (8×20µswave-form) |
Energy Throughput Rating | <12 mJ |
Impulse Spark Over Voltage | 2000 Volts Nominal |
DC Turn on voltage | 1400 volts nominal |
Protection Circuit | DC Blocked, Uni Directional |
Temp Range Storage/Operating | -40°C – +85°C / -40ºC – +50ºC |
Weatherisation | IP 65 |
Vibration | US MIL-STD 202, Meth.204,Cond.B |
RoHS Compliant | Yes |
Mating Life Cycle | > 500 |
Recommended Coupling Nut Torque | 7 to 10 lb-in |
Unit Weight | 0.227kg/pc / 8.0 oz |
Component | Material | Plating |
Body | Aluminium | White Bronze/Tri-Plate/Albaloy |
Inner Conductor Male | Brass | Silver |
Inner Conductor Female | Phosphor Bronze | Silver |
Coupling Nut | Brass | White Bronze/Tri-Plate/Albaloy |
Insulator | PTFE | — |
O Ring | Silicone Rubber | — |