Honda CB650R / CBR650R 2019 onward 3M RUBBER Tank Traction Grip Pads Black.
3M tank traction grips are an excellent addition to to any motorcycle,the quality 3m 370 grade rubber texture it has super soft texture is waterproof and high grip, , providing the rider with the grip and feel he/she needs to assist in better bike control. Allowing the rider to maintain a stable body position while cornering and braking, whilst also relieving fatigue and providing the rider with complete confidence allowing him/her to fully focus on the road (or track) ahead instead of slipping and sliding on the tank, working in both wet and dry conditions also protects your tanks from scratches when peeled off will not leave sticky residue, 3m Tank Traction Grips are equally at home on the track as they are on the commute! Made in the UK
FITTING INSTUCTIONS
When fitting grip kits, it is imperative to follow the
application instructions: The surface must be thoroughly cleaned using the IPA
wipe. If surface contaminates are not removed, the adhesive will not bond
correctly. The surface that the grip will be applied to, and the grip, must be
warmed prior to application. Application temperature should be a minimum of
15ºC/59ºF. Ideal application temperatures are between 20ºC/68ºF and 40ºC/104ºF.
These temperatures make the material very flexible and enable maximum bond
strength for the adhesive. The grip must be applied by placing on the prepared
surface in the correct position, before slowly pulling back the release liner,
whilst simultaneously applying firm pressure to activate the pressure sensitive
adhesive, taking extra care at the edges. It is best to start in the middle and
work out to one end first, then apply the other end. In this way, the grip will
not stretch too much as you apply it. (Care should be taken that the motorcycle
is secure so that the application pressure will not cause the motorcycle to
fall over). If the grip is fitted in one movement, it is impossible to prevent
trapped air. By slowly pulling back the release liner and working the thumb and
forefinger into the grip, these air bubbles will be avoided. The grips must
then be left for 48 hours to allow a full adhesive bond to develop before use.
‘These are not stickers, please do not treat them as such’ Common Application
Errors 1. Surface is prepared using incorrect cleaner or inappropriate material
2. Surface has been recently sprayed, painted or has new transfers or new
logo’s 3. Surface and/or grip is below application temperature 4. Surface has
protective wax/polish/coating 5. Incorrect pressure has been applied 6. Grip
used/bike ridden before full adhesive bond has formed
3m High grade 370 rubber traction tank pads
X2
Help protect the tank while providing grip for riders knees
Rubber effect tape provides great grip between the rider and the tank.
Waterproof
Easy application
Fitting instructions included