VL53L0X:
Key Features:
Fully integrated miniature module
940nm Laser VCSEL
VCSEL driver
Ranging sensor with advanced embedded micro controller
Fast, accurate distance ranging
Reported range is independent of the target reflectance
Operates in high infrared ambient light levels
Advanced embedded optical cross-talk compensation to simplify cover glass selection
Eye safe
Class 1 laser device compliant with latest standard IEC 60825-1:2014 - 3rd edition
Easy integration
Single reflowable component
No additional optics
Single power supply
I2C interface for device control and data transfer
Xshutdown (Reset) and interrupt GPIO
Programmable I2C address
Fully integrated miniature module
940nm Laser VCSEL
VCSEL driver
Ranging sensor with advanced embedded micro controller
Fast, accurate distance ranging
Reported range is independent of the target reflectance
Operates in high infrared ambient light levels
Advanced embedded optical cross-talk compensation to simplify cover glass selection
Eye safe
Class 1 laser device compliant with latest standard IEC 60825-1:2014 - 3rd edition
Easy integration
Single reflowable component
No additional optics
Single power supply
I2C interface for device control and data transfer
Xshutdown (Reset) and interrupt GPIO
Programmable I2C address
GY-VL53L0XV2:
PIN Description
VDD Regulated 2.8 V output. Almost 150 mA is available to power external components. (If you want to bypass the internal regulator, you can instead use this pin as a 2.8 V input with VIN disconnected.)
VIN This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I²C lines high to this level.
GND: The ground (0 V) connection for your power supply. Your I²C control source must also share a common ground with this board.
SDA: Level-shifted I²C data line: HIGH is VIN, LOW is 0 V
SCL: Level-shifted I²C clock line: HIGH is VIN, LOW is 0 V
XSHUT: This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default. Driving this pin low puts the sensor into hardware standby. This input is not level-shifted.
VDD Regulated 2.8 V output. Almost 150 mA is available to power external components. (If you want to bypass the internal regulator, you can instead use this pin as a 2.8 V input with VIN disconnected.)
VIN This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I²C lines high to this level.
GND: The ground (0 V) connection for your power supply. Your I²C control source must also share a common ground with this board.
SDA: Level-shifted I²C data line: HIGH is VIN, LOW is 0 V
SCL: Level-shifted I²C clock line: HIGH is VIN, LOW is 0 V
XSHUT: This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default. Driving this pin low puts the sensor into hardware standby. This input is not level-shifted.
GY-530 VL53L0X:
Specifications:
Infrared distance measurement module
Model: GY - VL53L0X
Using the chip: VL53L0X
Power supply: 2.8 to 5V
Ranging time: <30ms
Operating mode: Power consumption 20mW
Standby power consumption: 5μA
Distance: <2 meters
Communication: the IIC communication protocol (fully compatible with 3-5 v system)
PCB size: about 13.3x10.5mm/0.51"x0.43"
No Retail Packages
Infrared distance measurement module
Model: GY - VL53L0X
Using the chip: VL53L0X
Power supply: 2.8 to 5V
Ranging time: <30ms
Operating mode: Power consumption 20mW
Standby power consumption: 5μA
Distance: <2 meters
Communication: the IIC communication protocol (fully compatible with 3-5 v system)
PCB size: about 13.3x10.5mm/0.51"x0.43"
No Retail Packages
Application:
wall detection, cliff detection, collision detection
sweeping robots
faucet, soap dispenser, Dry cell phone
unmanned aerial vehicles, IoT products.
wall detection, cliff detection, collision detection
sweeping robots
faucet, soap dispenser, Dry cell phone
unmanned aerial vehicles, IoT products.
CJMCU VL53L0X:
Features:
Interface: I2C IIC
Power supply: 3-5V
Laser: 940nm
Driver: VCSEL
Measures range: ≤ 2m
Fully integrated miniature module
Ranging sensor with advanced embedded micro controller
Fast, accurate distance ranging
Reported range is independent of the target reflectance
Operates in high infrared ambient light levels
Advanced embedded optical cross-talk compensation to simplify cover glass selection: Eye safe
Class 1 laser device compliant with latest standard IEC 60825-1:2014 - 3rd edition
Easy integration
Single reflowable component
Xshutdown (Reset) and interrupt GPIO
No additional optics
Interface: I2C IIC
Power supply: 3-5V
Laser: 940nm
Driver: VCSEL
Measures range: ≤ 2m
Fully integrated miniature module
Ranging sensor with advanced embedded micro controller
Fast, accurate distance ranging
Reported range is independent of the target reflectance
Operates in high infrared ambient light levels
Advanced embedded optical cross-talk compensation to simplify cover glass selection: Eye safe
Class 1 laser device compliant with latest standard IEC 60825-1:2014 - 3rd edition
Easy integration
Single reflowable component
Xshutdown (Reset) and interrupt GPIO
No additional optics
Package Include:
1pc