HT21 TDA7498E 2.1 Channel Bluetooth Audio Power Amplifier Module 160W*2+220W

Wuzhi Audio APP download link: (This version of APP is compatible with new product use operation, please download and update APP before using the product) http://www.qingdaowuzhi.cn/btapp/Wuzhi_Audio_V1.0.3.apk
 
Description:
Product name: 2.1 channel Bluetooth audio power amplifier module
Product model: ZK-HT21  , ( the Upgraded version upgraded to Bluetooth decoder chip)
for Bluetooth version: 5.0 (unobstructed, 15 meters)
Input method: AUX + for Bluetooth + USB (the dial button to switch modes and songs)
Number of channels: 2.1 channels (left channel + right channel + subwoofer)
Amplifier chip:TDA7498E
Adapter power supply: DC15~36 V (under voltage protection below 9V,    the 12V power supply can also be supported)
Adapted speakers: 30-200W, 4-8Ω
Output power: left and right channels ≤160w
Subwoofer≤220w
Protection mechanism: anti-reverse connection, undervoltage, overheating, overcurrent, short circuit protection
Product size: 145*126*28mm
Product weight: net weight 327g, including packaging 395g

Tip: Tip: In case the audio signal input is large enough and the supply voltage/current is large enough, there will be enough output power
The higher the power supply voltage the higher the output power, the smaller the speaker impedance the higher the output power
Please ensure that the power of the adaptable power supply is greater than the actual working power of the amplifier!
 
Package Included:
1* Power amplifier board kit
 
 
Common problems.
1. How to choose a power supply?
Board with the power supply is very critical, the selected power supply ripple must be small, ripple power supply will lead to amplifier board bottom noise becomes large, there is a current sound. The higher the voltage, the higher the current, the more output power, if you only 12V 1A, so you can take 3-4 inch speakers. If you are more than 19V 5A, with 8-10 inch no problem, the power supply must pay great attention. If the voltage is too low, the sound amplification is easy to cause sound distortion, if the current is too small to bring up the speaker will pull down the voltage, work improperly or poor sound quality. Recommend the use of 18V19V24V, current 8A or more power supply, or 32V10A or more power supply. If you only have 12V 15V 2A power supply, you can also use but the power is small, the use of volume selection to close to the maximum may be distorted, affecting the sound quality. If you want to get the maximum output power, it is recommended to use more than 36V10A adapter, 1 60W ~ 200W 40 speakers, the volume is adjusted to the maximum.

2. How to choose the speaker?
About the type of speakers: commonly used speakers are generally 4-8 ohms, can be used. Left and right channel speakers need to be connected to full-range speakers or high-frequency speakers, power between 30W- 200W. Subwoofer speakers can not be connected to ordinary speakers, need to connect the speakers with subwoofer speakers, power between 50- 200W. Subwoofer speaker dive frequency of at least 50Hz.
If your speaker power is small, such as between 20W-50W is also available, you need to supply a small voltage to prevent the speaker from burning after playing loud, such as choosing a power supply of 15V or less. The higher the voltage you choose, the more sound or power you can output. Speaker power should not exceed 200W, otherwise it will affect the sound quality.

3. Audio input mode introduction
This audio amplifier module has three audio input modes: - one is Bluetooth input, - one is AUX audio input, and one is U disk input. Bluetooth mode, if the audio cable or U disk is inserted, it will automatically switch to the audio input mode or U disk input mode, Bluetooth mode has the lowest priority. In the case of already inserted audio cable or USB flash drive, you can also use the dial button to switch the mode.

4. How to adjust the total volume?
MAIN-VOLUME knob is to adjust the total volume. The total volume increases with right rotation and decreases with left rotation. The total volume has an effect on the volume of the left and right channels and the subwoofer.

5. How to adjust the high and low sound of the left and right channels?
R&L CHANNEL-BASS knob is to control the bass, right turn the bass enhancement, left turn the bass attenuation. R&L CHANNEL-TREBLE knob is to control the treble, right to enhance the treble, left to decay the treble. When the knob is in the middle position, the treble is not enhanced nor attenuated.
Note: treble and total volume at the same time to the maximum, easy to cause amplifier protection, the sound stutter.
The treble down or the right MAIN-VOLUME knob left, so that the total volume is reduced.

6. How to adjust the subwoofer?
SUBWOOFER-VOL UME knob is to control the volume of the subwoofer. Turn right to make the volume louder, turn left to make the volume smaller.
SUBWOOFER-FREQ knob is to control the subwoofer cut-off frequency. The frequency increases with the right knob and decreases with the left knob. The frequency adjustment range is 20Hz- 200Hz. the right frequency increases, the high frequency part is released, the subwoofer sound will seem louder, is normal.

7. Small sound is fine, the sound becomes larger, the phenomenon of muddy sound?
Sound distortion, please turn down the total volume or change the voltage level of higher adapter power.

8. Small sound is fine, after the sound becomes louder, the phenomenon of sound stuttering?
Input power supply power is insufficient, the power supply itself intermittent power failure protection, please replace the power supply with a higher power; or the output power is too large, the amplifier board heat serious, thermal protection, reduce the volume or strengthen the heat dissipation.

9. What factors are related to the quality of sound?
The sound quality is not only related to the amplifier module, but also with the power supply, audio sources and the entire audio system. Basically _ on the audio system of each link will affect the sound quality, the main links are audio transmission lines, audio power supply, tone circuit, amplifier circuit, speakers and the surrounding environment. Only when the sound source, power supply, amplifier module and speakers match, the sound quality is the best.

1,We will arrange shipping for you within 24 Hours after payment cleared except the holidays.

2,We only ship to the confirmed address provided by PayPal. Before you pay, please make sure your address in PayPal matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

3,we will ship out the order in 1-2 business days after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.

4,We ship items to Worldwide. Thank you!

We accept PayPal payment ONLY.

If you  do not have Paypal account, please registered with (http://www.paypal.com)  Payment must be received within 5 days after auctions ended. Please do not  bid if you are not intending to buy. Unpaid dispute will be filed to ebay  for the non payable bidders.

  • We  are not responsible for custom duty or import  tax.

  • We will leave POSITIVE FEEDBACK  after receiving the payment. Please contact us if  your are  not satisfied with the item after receive  it.

  • We could offer  refund,  and refund request is available only requests  within  a week after parcel received & returning the  item as  the same condition as received.

  • We offer 100% refund if the item is broken before  arrival,  all you need to do is sending us the clear  pictures  to show it is broken. Defective situation must be  noticed within 7 days after delivery.

  • All emails will be answered within  1  business day. If you do not receive our reply,  please kindly re-sent your email,and we will reply  to you as soon as possible.

  • All items sold by us  are being described to the best of our abilities, as  accurate as possible, and with utmost  conscientiousness on our part.However, to avoid any  potential oversights, I respectfully request your  assistance in helping us to make this a mutually  satisfactory transaction by Thoroughly reviewing  item description and photos, and asking all  questions Prior To Bidding.

  • Please Note that size  and color representation are subject to  manufacturing variance and may not be exact. Also  note that monitor settings may vary from computer to  computer and may distort actual colors. Please read  these terms thoroughly before placing your bid. 

  • We will automatically  leave a positive feedback to everyone who has  complete the transaction and leave us positive  feedback.

  • Please do not forget  to give us Five Stars on all of the Detailed Seller  Ratings. Thanks!

  • In the unlikely event  you are not satisfied with the transaction, please  contact us before you sumbit your evaluation. We  believe that everything could be solved by  communication.
    1.in order to provide you the best  service*****,please treat the transaction  fairly.*feedback is simply what we pursue.
    2.Please Do contact us first to get a better  solution before you would leave a *neutral or  *negative feedback
    3.We strive for 5-star service by stating upfront  our policies, our shipping rate& our shipping  frequency. if you were pleased with this  transaction, please respond with all 5 stars! if you  are not pleased, simply let me know via e-mial  rather than leave low score, and I'll work to make  it that way
    4.Please email me through 'MY MESSAGES' or "Ask  Seller Questions" if you have any question about our  listing or your purchase

DataCaciques