Air flow
270 m³/h
Double-sided flue gas economizer / heat exchanger is a device that allows you to recover up to 40% of the heat that goes into the chimney. Air flow 270 m³ / h.
The hot exhaust gases from the heater into the chimney pass through the heat exchanger, heating the clean air taken in from the room at the same time. Thanks to the radial fan, the heated air is forced through the two warm air outlets.
The additional heat obtained from the flue gas increases the heating efficiency of the device, thus allowing to heat a larger area or reduce costs heating by reducing the fuel consumption of the heating device.
By connecting blow ducts to the economizer outlets, the heated air can be directed to adjacent rooms. The shorter the duct section, the greater the efficiency, so it is recommended to use ducts to heat rooms located "through the wall" with the room where the heating device is located, or at a short distance from this room.
The economizer is especially useful for heating social rooms (canteen, cloakroom, etc.), offices and points of sale.
The economizer should be installed on the vertical section of the exhaust pipe, as close as possible to the flue - the exhaust outlet from the appliance (where the exhaust gas temperature is the highest)
Air flow
270 m³/h
The diameter of the chimney connection
150 mm
The diameter of the hot air outlets
80 mm
Temperature rise
UP TO 100 °C
Height
610 mm
Width
370 mm
Depth
420 mm
Weight
8,7 kg