Genuine LMR®-600-Lightweight Flexible Low Loss Communications Coaxial cable in various lengths - manufactured by Times Microwave Systems and available from McGill Microwave Systems Limited – Authorised Distributor and Assembly House for all Times Microwave Systems products.

Manufactured by Times Microwave Systems(TM) and officially distributed in Europe by McGill Microwave Systems Ltd

Important Alert: There are many "fake" or "alternative" attempted copies of the Times Microwave Systems LMR ® High Performance Coaxial Cable and Connector range - buy only 100% genuine Times Microwave Systems Products - available only here on eBay from an official UK Authorised Distributor. 


LMR®-LW is a lightweight low loss ccoaxial cable that employs an aluminum braid shield instead of the traditional tinned copper shield. LMR-LW has been designed and engineered with a combination of electrical, physical and mechanical properties that reduce weight and cost. 

 LMR®-600-Lightweight Flexible Low Loss Communications Coaxial Cable is ideal for:
  •  Drop-in replacement with up to 40% Lower Attenuation for RG-8 , RG 213 ,RG 214 and 9913 Air-Dielectric type Cables
  •  Jumper Assemblies in Wireless Communications Systems 
  •  Short Antenna Feeder runs
  •  Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMAX, SCADA, Mobile Antennas, Sat Comms , Radio Amateur ,PMR 2 way Radio) requiring an easily routed, low loss high performance RF cable 
  •  3G or 4G repeaters
  • Radio antennas or receivers
Attenuation dB figures per 100m     Mechanical Specifications            Temperature range: -40⁰C +85⁰C 

30 MHz : 1.4 dB                                  Bend Radius: installation 38.1mm   Inner Conductor: Solid BCCAI (4.47mm)
50 MHz : 1.8 dB                                  Bend Radius: repeated 152.4mm    Dielectric: Foam PE (11.56mm)
150 MHz : 3.2 dB                                Bending Moment: 3.73Nm               Outer conductor: Aluminium tape (11.71mm)
220 MHz : 3.9 dB                                Weight:  0.147Kg/M                         Overall Braid: Tinned copper (12.45mm)
450 MHz : 5.6 dB                                Tensile Strength   118Kg                  Jacket: Black PE (14.99mm)
900 MHz : 8.2 dB                                Flat Plate Crush: 1.07Kg/mm
1500 MHz : 10.9 dB
2500 MHz : 14.5 dB



This cable can be installed with the following connectors:

LMR-600 'TC'  (solder-on centre pin) Connectors

TC-600-716FC, TC-600-716MC, TC-600-716M-X, TC-600-716M-RA-D , TC-600-716M-RA-D, TC-600-HNMC, TC-600-LCM, TC-600-NF-X, TC-600-NF-BH, TC-600-NFC-BH, TC-600-NMC-2-D, TC-600-NMC, TC-600-NMH-X, TC-600-NMH-75/50, TC-600-NMH-RA-D, TC-600-QDSM, TC-600-TM-X, TC-600-TF-X, TC-600-TF-RP, TC-600-TM-RP, TC-600-TM-RA-D, TC-600-UMC, TR-600, TC-600-4310M-X, CR-600-X

 

LMR-600    'EZ' Install (non-solder) Connectors

EZ-600-4310M-X, EZ-600-4310M-RA-X, EZ-600-716F-X, EZ-600-716M-X, EZ-600-716M-RA-X, EZ-600-78 EIA, EZ-600-FM-75-X, EZ-600-FMH-75, EZ-600-NF-BH-X, EZ-600-NF-BH, EZ-600-NF-X, EZ-600-NMH-X, EZ-600-NM-75, EZ-600-NMC-2-D, EZ-600-NMK, EZ-600-NMH-RA-X, EZ-600-QNF-X, EZ-600-QNM-X, EZ-600-QNM-RA-X, EZ-600-SM-X, EZ-600-TF-X, EZ-600-TF-BH-X, EZ-600-TF-RP, EZ-600-TM-X, EZ-600-TM-RP, EZ-600-UM, EZ-600-UM-X, EZ-600-UM-RA-X, CR-600-X