1pc Radiator For 2009-2017 Toyota Corolla Matrix Pontiac Vibe 1.8L CU13106

Specifications:

Size: 86x13x84cm

Weight: 10.06kg

Material: Plastic&Aluminium

Color: Silver

Placement on Vehicle: Front

Core Materil: Aluminium

Tank Material: Plastic

Inlet Diameter: Φ34

Outlet Diameter: Φ34

CORE SIZE(mm): 600*378*16

Part Number: 13106, 164100H261, 164100T030, 164100T031, CSF3445, Q13106, RAD13106, SBR13106, TO3010323, TYC13106

Other Part Number: CU13106

Fitment:

For 2009 Pontiac Vibe 1.8l L4

For 2009 Toyota Corolla 1.8l L4

For 2009 Toyota Matrix 1.8l L4

For 2010 Pontiac Vibe 1.8l L4

For 2010 Toyota Corolla 1.8l L4

For 2010 Toyota Matrix 1.8l L4

For 2011 Toyota Corolla 1.8l L4

For 2011 Toyota Matrix 1.8l L4

For 2012 Toyota Corolla 1.8l L4

For 2012 Toyota Matrix 1.8l L4

For 2013 Toyota Corolla 1.8l L4

For 2013 Toyota Matrix 1.8l L4

For 2014 Toyota Corolla 1.8l L4

For 2014 Toyota Matrix 1.8l L4

For 2015 Toyota Corolla 1.8l L4

For 2016 Toyota Corolla 1.8l L4

For 2017 Toyota Corolla 1.8l L4

Package Include:

1pc Radiator

Features:

1. Built to strict quality control standards 100% factory tested

2. ISO9001/IATF 16949/EAC

3. Easy Installation，100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards

4. Mechanically tested prior to leaving the factory ensures optimal performance and enhanced durability.

5. Perfect match for the original car.

6. The Core was made from high quality Aluminum.Effective heat dissipation.

7. Good sealing.

8. Direct Replacement, easy to be installed

Attention:

1. The radiator cap that has not passed the test can’t release the pressure when it reaches the pressure value.

2. The damaged thermostat is unable to carry out a large cycle, resulting in a continuous increase in the radiator pressure.

3. The radiator fan does not turn, resulting in high temperature in the water tank.

4. Drain the air from the cooling system. Refer to the user manual or repair manual.

5. Please refer to owner's manual to add coolant.

6. Do not open the hood until the steam has subsided. The engine compartment may be very hot, causing serious injuries such as burns.

7. Please stop the vehicle immediately, when “ENGINE OVERHEAT/High Temperature” shows on the dashboard or steam comes out from under the hood.

8. Keep hands and clothing (especially a tie, a scarf) away from the fans and belts. Failure to do so may cause the hands or clothing to be caught, resulting in serious injuries.

9. Do not loosen the radiator cap while the engine and radiator are hot. Serious injuries, such as burns, may result from hot coolant and steam released under pressure.

Note:

1.It will be better if you can check with that above chart to make sure if this radiator will fit your vehicle.

2. The radiator cap that has not passed the test can't release the pressure when it reach the pressure value.

3. The damaged thermostat is unable to carry out a large cycle, resulting in a continuous increase in the radiator pressure.

4. The radiator fan does nont turm, resulting in highh temperature in the water tank.

5. After loading the product on your vehicle  and adding the coolant, tighten the rotary cover and leave your vehicle idling for 10-20 minutes. After completely cooling the coolant, open the cover and fill the product with coolant. Please make sure there is no gas in the product.

6. Before you start up your vehicle, please make sure there is coolant in the radiator.