sort by color:
XT60 parallel charging board-T port
XT60 parallel charging board - XT60 port
XT60 parallel charging board - banana head port
T head and charging board
About some model friends asked why there are 7 sockets to charge 6 sets of batteries at one time Answer: The other socket is used to expand other boards, because this board can be connected in series with 3 sets of batteries at the same time, charging 18 batteries at the same time
Product Features:
1. Comes with short circuit protection function.
2. It supports the combined use of 3 sets of parallel charging boards (that is, 18 sets of batteries of the same nature can be charged at the same time).
3. The ultra-thick copper foil of 20Z can withstand current 60A continuously.
4. Overcharging of a single battery can be avoided, so the balancing efficiency can be improved, and the later stage of the balancing charging cycle can be greatly shortened.
5. The charging time is only the charging time of a single battery, so the charging time of the battery can be saved.
6. Avoid the trouble of repeated battery replacement.
Steps for usage:
1. Connect the two ends of the balance cable to the balance terminals of the balance charger and the charging board respectively.
2. Connect the power terminal of the balanced charging board to the output terminal of the balanced charger.
3. Connect the battery to the charging board. Insert the balance head first, then connect to the battery output.
Set the charging voltage (same for a single battery) and current. The current setting method is as follows:
I=i1+i2+3…in (n≤6)
I: Total Current. (total current)
I: the charge current of every battery. (Charging current per battery)
n: the quantity of battery (total number of batteries)
Notice:
If your balanced charger maximum output current is less than the total current "I", set the charger's current to the maximum value. The maximum current of the balanced charging board is 60A. The voltage of the battery must be the same when charging, and the capacity and discharge rate can be set arbitrarily. After several balancing, the voltage will be more balanced and the voltage difference will be smaller.
warn:
If you only need to charge less than 6 battery packs, please put the housing on the T plug or other plugs currently in use, because each T plug has electricity when charging, which can avoid safety accidents.
【product name】Para Board lithium battery and punching board--XT60 PRO version
【Product specifications】It can be used with common series (such as IMAX B8) or independent (such as UN A6) chargers to charge 6 groups of 2-6S battery packs of the same type and the same number of cells in parallel. It can support 6 groups of 2S, Or 6 groups of 3S, or 6 groups of 4S, or 6 groups of 5S, or 6 groups of 6S for parallel balanced charging.
【specification】
1. The balanced output line adopts 20AWG multi-strand silicone wire.
2. The main input line is made of 12AWG+4mm gold plug-in integrated multi-strand high-quality silicone wire.
3. Adopt high-quality XT60 output plug.
4. Thicken PCB copper foil to allow safe charging current of 80A.
Packing:1PC
Warranty period: 120 days