410W Canadian Solar Mono Half Cell Panels - Super High Power Mono PERC HiKU, MCS Approved

FOR LARGE PANEL DELIVERY TIMES, SCHEDULES AND COSTS - CLICK HERE

Super High Efficiency Mono PERC Module (CS6R-410MS) Dimensions: 1722X 1134X 30mm

Cables from rear junction box are approx 1m positive and 1m negative.

CANADIAN SOLAR INC.is committed to providing high quality solar products, solar system solutions and services to customers around the world. As a leading PV project developer and manufacturer of solar modules with about 30 GW deployed around the world since 2001, Canadian Solar Inc. is one of the most bankable solar companies worldwide.

With proprietary mono wafer and cell technologies Canadian Solar have developed an extraordinary module rage. Combining the best technology and design, it also reduces LCOE and installation costs.

The Super High HiKu mono modules with dimensions of 1722X 1134X 30mm, have the following unique features:

MORE RELIABLE (THANKS TO HALF CUT CELL TECHNOLOGY):

• Lower internal current, lower hot spot temperature
• Cell crack risk limited to smaller area of the cell
• Innovative symmetrical module design means better shading tolerance
• Heavy snow load up to 5400Pa and increased wind load up to 3600Pa

Cell: 120 x dual-cell Mono, 156 x 78 mm

Dimensions: 1722X 1134X 30mm

Weight: 21.3kg

30A 12V-24V MPPT charge Controller - EPever XTRA 3215N - 150VOC PV - LCD Meter

New XTRA series - 3rd Generation MPPT

For 12V Solar System: 390W solar panel (150V for max input voltage)
For 24V Solar System: 780W solar panel (150V for max input voltage)

No Fan for silent operation, great for vans, boats or any live in spaces

With built in LCD advanced display and programming screen (XDS2)

New XTRA series has Lithium battery support

​

​The XTRA tracer models have a current limiting function, you can connect 1.5 times the rated power to the controller​so if your on a budget you can use a smaller controller with more panels so that you get more power in winter orlow light but don't risk overloading the controller in the summer. The output will be limited to the max listed above.

New EPEver (Tracer) series is EPsolar’s thirdgeneration of MPPT controller.

XTRA series are advanced maximum power point tracking (MPPT) charge controllers, for off grid photovoltaic systems, with display unit.

In order to maximise the energy harvest from PV arrays and simultaneously minimise the power loss within a wide range of operating conditions, XTRA series apply an advanced smart algorithm which results in up to 30% higher efficientcharging, compared to a conventional pulse width modulation (PWM) charge controller. Xtra series controller have limit protection function on charging current &charging power, as well as auto derating power operation at high temperature; the above protection ensure the stability of system even at exceeded rated PV power and over temperature conditions.

Protection class IP32 and isolated RS485 communication port further improve the controller’s reliability under different application requirements. XTRA series controllers incorporate a self-adaptive three-stage charging algorithm based on a digital control circuit, which effectivelyprolongs the lifespan of battery and significantly improve the system performance. It also has extensive electronic protection for overcharge, over discharge, PV&battery reverse polarity and etc. to ensure the sustainability and durability of the off grid solar system.

Features:

• Advanced MPPT technology & ultra-fast tracking speed is up to 99.5% guaranteed
• Maximum DC/DC transfer efficiency is as high as 98%, full load transfer efficiency is up to 97.4%
• Wide MPP operating voltage range
• Low temperature protection and self activate function for lithium battery charging
• Limit charging power & current over rated range
• Real-time energy statistics function
• Multiple load work modes
• Comprehensive electronic protection
• Compatible with lead acid and lithium-ion¹ batteries
• Over temperature protection and power degrading in higher temperature
• Optional LCD display units (XDB1/XDS1/XDS2) and accessories
• High quality and low failure rate components of ST or IR to ensure service life
• Isolated RS485 communication port with 5V/200mA protected output, with standard Modbus protocol Monitor and set the parameters via APP or PC software
• Dustproof and waterproof design with IP32² protection class
• CE certification(LVD IEC62109,EMC EN3/1-6-61000)

¹ If using Lithium battery, customer should use “PCsoftware” to set the lithium battery parameters
² Ingress of solid objects:Protected against solid objects over 2.5mm
² Ingress of liquids: Protected against falling drops of water, if the case is disposed up to 15 from vertical

Electronic Protections：

• PV short circuit protection
• PV overvoltage alarm protection
• PV current limiting protection
• PV reverse polarity protection
• Battery overcharge protection
• Battery over discharge protection
• Battery reverse polarity protection
• Load overload protection
• Load short circuit protection
• Overheating protection

Download full spec sheet

Download Manual

Boat Solar Panel Tilting Mounting Bundle - Stainless Steel Swivel Brackets - NOTE optional tool bundle link in description

SEE ESSENTIAL TOOLKIT LINK BELOW, PURCHASE IF YOUR INSTALLER DOES NOT HAVE THESE PARTS AS REQUIRED TO FIT:

TOOLKIT LINK HERE

Tool Kit

A tool kit with everything you need for a waterproof and secure installation supplied separately, select the tool kit option to purchase this as well.

2 top spec cobalt drill bits and M10 tap and ratchet allow quick and easy installation with even the toughest steel roof.

Supplied with marine sealant, a secure and waterproof installation can be done in as little as 4 hours.

----

Boat Solar Panel Tilting Mounting Bundle - Stainless Steel Swivel Brackets

A pair of 2mm stainless steel (316L) solar panel brackets designed with canalboats and vehicles in mind, supplied with anti tamper bolts & bit.

Allow your solar panels to both tilt and swivel throughout the year, maximising the sun's energy whilst providing excellent ventilation. This can improve the power of your panels by up to 40%, perfect for smaller systems where efficiency is key. *Standing at just over 25cm high and 16cm wide they're designed to maximise the angle of your panels whilst being low enough for most bridges and tunnels.

Using any padlock attach your panel securely to the roof via an integrated 8mm stainless steel chain that secures directly to the bracket, keeping your panels safe. The anti tamper bolts secure the bracket to your roof for maximum security deterring even the most determined of thieves.

Using M10 for both bolts and glands means you only need to drill six identical holes, saving both time and money on tools or labour whilst providing a safe and secure mounting solution.

Contents:

1 x Stainless Steel Bracket with Chain

1 x Stainless Steel Bracket with no chain

4 x TORX Security bolts

2 x Hand Spindles

2 x Stainless Steel Wingnuts

2 x Stainless Steel Spring Washers

2 x Stainless Steel Washers

1 x TORX Security bit

Premade MC4 6mm Solar Cable 20 meter - (Cut in half to make two MC4 to bare wire cables when used in our bundles) 20M length

Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.

(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 10m lengths, MC4 to bare wire.)

Double Insulated UV protected solar cable

Max load: 70A in air

Our solar cable is ozone resistant according to BS EN 50396

UV resistant according to HD 605 S2 and is tested for durability according to EN 60216

Flexible tinned copper conductor

Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black

Fitted with Staubli 4-6mm MC4s -Staubli MC4 Link

Wire size range: 6mm2

Optional MT50 Display screen for Tracer AN BN CN MPPT Charge Controllers 10a 20a 30a 40a 60a 100a

Optional Meter for AN,BN, CN, XTRA MPPT charge controllers. DuoRacer requires the MT11, see separate listings.

Comes with 2m RJ45 cable in the box, if you need longer we have a 5m cable here5m RJ45 Cable for MT50

PLEASE NOTE - YOU CANNOT USE THE MT50 AT THE SAME TIME AS THE BLUETOOTH / WIFI OPTIONAL ADAPTORS

Features:
·Automatic identify the controller, and display the type, model and relevant parameter data
·Large-screen multifunction LCD displays all the operational data and system working status in digital, graphic and textual forms
·With six navigation function keys, the operation is direct, convenient and rapid
·Real-time energy statistics recording
·Both data and data flowing on the same lead, no need for external power
·Real-time monitoring and acoustic alarm of failure information of the controller
·Longer communication distance based on RS485

Functions Via MT50
·Diversified load control modes : manual, light ON/OFF, Light ON+ Timer, Time Control
·Battery type selection: Gel, sealed, flooded and USER type
·Real-time monitor
·Programmable parameters
·Energydisplay function

Download Guide to change language

Please note: Older MT50s manufactured before August 2017 are not compatible with the newer XTRA and AN controllers.

Use with lithium batteries:The MT50 ( sv 2.18 version) can be used to program a lithium battery for our XTRA controllers. However it cannot do this for the Tracer-AN 60A and 100A. You must use a PC cable and software for programming lithium.

10mm Cable - M8 Lug to Bare Wire - 2 Meter

3 Way Enclosure Consumer Unit IP65 Weather Proof - Garage, Shed for AC or DC Tomzn Breakers

3 Way unit can hold our Tomzn DC and AC breakers

Unit can holdthe following options:

• 1 x AC RCBos
• 3 x DC breakers Under 80A (2 x DC breakers if under 63a and using cable entry glands)
• 1 x DC breakers 80A - 125A
• 1 x DC Breakers Under 63A AND 1 x DC Breaker 63A - 125A

Best practice would be to use this unit with no bigger than 10mm square cable and appropriately sized breakers if you are using it with glands for a water tight fit. If you are using it in an environment that is already dry and dust free the use of glands may not be necessary.

This is an empty unit, you must addthe breakers you need to your cart as well, see related items tab above to see the breakers that fit.

You will also need suitable cable entry glands - please see related products tab.

Cradle Cable Gland Entry box with cradle for connectors and glands

Cable Gland Entry Box, use to connect through external surface. Perfect for solar panel cables coming from outside to controller.

This comes with a cradle for keeping your MC4 connectors in place and tidy.

Dimensions:

Length 182mm

Width 95mm

32A DC DIN Mount Breaker 125V MCB C curve

Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.

Digital Multimeter 500V AC/DC for setting up and testing your system - including battery

A small, low cost multimeter supplied with test leads and holster.

• 3½ digit, 1999 count display
• AC/DC voltage measurement
• DC current
• Resistance measurement (20R to 2MR)
• Diode, continuity and transistor tester
• Square wave output
• Low battery indication
• Requires a 9V PP3 battery (included)

DMM Functions: DC Current, AC/DC Voltage, Continuity, Diode, Resistance, Transistor
No. of Digits: 3.5
DMM Response Type: Average
Display Count: 1999
Range Selection: Manual
Voltage Measure DC Max: 500V
Voltage Measure AC Max: 500V
Current Measure DC Max: 5A
Resistance Measure Max: 2Mohm