120W Bimble Mono Solar Panel - NEW SIZE 860 x 700 x 25mm - New A Grade - small size to fit small spaces on vans and boats

Bimble Solar 120W Mono Panel

120W power, great for smaller applications and lighting. These are 12V panels so you can use with PWM controllers to make a very cheap system.

Size:860 x 700 x 25mm

MC4 ended premade solar cables are60cm long each

Highlights

• 12V, suitable for charging batteries via PWM or MPPT charge controllers
• Monocrystalline
• Widely using of the most popular and mature type of modules for off-grid system.
• Leading manufacturing technology in PV industry, strictly controlling the quality of raw materials and the process of producing
• 100% EL inspection, ensures modules are defects free.
• Cells binned by current to improve module performance
• Anti reflective glass. Not only to increase the light absorption, but also to make the module has the function of self-cleaning in water environment, effectively reducing the power loss caused by dust.
• Outstanding performance in low-light irradiance environments.
• Excellent mechanical load resistance:Certified to withstand high wind loads(2400pa) and snow loads(5400pa).
• High salt and ammonia resistance
• Positive power tolerance:0-+5w
• Junction Box with cables and MC4 Connectors

Certificates

• SGS-TUV Certificate
• PID free Testing Certificate
• Salt-Mist Testing Certificate
• Ammonia-Corrosion Testing Certificate
• Fire Testing Certificate
• CQC Certificate
• IEC61215、IEC61730 Certificate
• ISO 9001:2008:Quality managent systems
• CE Certificate

Warranty

• 10 years product warranty
• 10-years 90% of Min. rated output power,and 25-years 80% of Min. rated output power warranty

We have packages for bothoff grid solar panel systemsandon gridInstallations.(see other listings)

Delivery

As theseare small panels weuse standard couriers - delivery is cheaper.

Or you can collect for FREE from Near Brighton, East Sussex

20A Victron SmartSolar MPPT100-20 - 100Voc, PV Solar Charge Controller - 12V, 24V, 48V Battery

Victron Smart Solar 20A MPPT charge controllerwith max VOC 100V for 12V, 24V or 48V battery systems.

MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

Load output
The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.

Download full spec sheet

Solar ABS Mounting System for Caravans, Boats, Sheds 7 piece set - BLACK ONLY

Fixes without screwing holes in your roof!

Panels over 175w should be bolted down, these are unsuitable.

Set of seven black solar panel mounting kit, including 6 brackets (4 corners and 2 sides) and cable gland. They are ideal for fixing our solar panels to any vehicle, caravan, boat, barge or even outbuildings and sheds to provide a strong, secure and aesthetically pleasing fixing method, the mounts will support the solar panel at the correct height above the surface to enable the flow of air underneath the panel and keep it cool, ensuring the solar panel functions at it's optimum. The mounts can be safely bonded to the surface removing the need to drill holes. The panel is secured by screwing or bolting it to the mounting corner, but the corner itself can be fixed with a good strong adhesive like 'Sikaflex' or 'CT1' or anypolyurethane sealant to the roof. (Ensure the roof is clean and dry before attaching. If a painted roof ensure the paint is not flakey)

ABS mounts raise the panel by 25mm. Edge of panel to edge of ABS is 55mm.

We sell CT1 which is great for sticking these down, please see related products tab for different colours avaialble.

If you are fitting to a vehicle we recommend that you additionally bolt or screw the panel and mounting down as well, as the strength of these systems is only as strong as the roof type or painton your roof!

NOTE - You need to purchase additional self tappers or bolts to fit the panel to the ABS mounts, see below for one method...

Here is a good tutorial to get you started:

ABS Mounting tutorial

Premade MC4 6mm Solar Cable 10 meter - (Cut in half to make two MC4 to bare wire cables when used in our bundles) 10M length

Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.

(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)

Double Insulated UV protected solar cable

Max load: 70A in air

Our solar cable is ozone resistant according to BS EN 50396

UV resistant according to HD 605 S2 and is tested for durability according to EN 60216

Flexible tinned copper conductor

Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black

Fitted with Staubli 4-6mm MC4s -Staubli MC4 Link

Wire size range: 6mm2

3 Way Enclosure Consumer Unit IP65 Weather Proof - Garage, Shed for AC or DC Tomzn Breakers

3 Way unit can hold our Tomzn DC and AC breakers

Unit can holdthe following options:

• 1 x AC RCBos
• 3 x DC breakers Under 80A (2 x DC breakers if under 63a and using cable entry glands)
• 1 x DC breakers 80A - 125A
• 1 x DC Breakers Under 63A AND 1 x DC Breaker 63A - 125A

Best practice would be to use this unit with no bigger than 10mm square cable and appropriately sized breakers if you are using it with glands for a water tight fit. If you are using it in an environment that is already dry and dust free the use of glands may not be necessary.

This is an empty unit, you must addthe breakers you need to your cart as well, see related items tab above to see the breakers that fit.

You will also need suitable cable entry glands - please see related products tab.

CLEAR CT1 Sealant & adhesive - Bonds everything, Works Underwater - 290ml - Stick down panels & ABS Mountings

For use with our stick down panels and ABS mounting kits - also great for sealing cable holes

CT1 will successfully bond:

• Metals (including lead)
• Glass
• Mirrors
• Wood
• Polystyrene

Unique adhesion on virtually any material in most applications without the need for additional fixings. CT1 is the ultimate solution for sealing.
Excellent resistance to chemicals

• Prevents fungal growth
• UV resistant
• Excellent resistance to vibration
• Food safe - conforms to ISEGA Standards
• Works in wet or dry conditions
• Perfect for marine and boating maintenance, accident and emergency repairs
• Can be used in all salt-water environments
• Odourless
• Does not shrink
• Can be painted
• Contains no solvents
• No isocyanates
• Unique flexibility
• Environmentally compliant
• Instant repair and bonding with fibre glass and carbon fibre materials

Application
Apply with a standard cartridge caulking gun or pneumatic version at approximately 6 bar (108psi)

Drying Time
Skin cure 23ºC 50% R.H. 8 minutes
Non-adhering 23ºC 50% R. 25minutes
Full cure time 23ºC 50% R.H. 24hrs - 6mm (48hrs - 7/12mm)

6mm Cable - M8 Lug to Bare Wire - 1 Meter

Cradle Cable Gland Entry box with cradle for connectors and glands

Cable Gland Entry Box, use to connect through external surface. Perfect for solar panel cables coming from outside to controller.

This comes with a cradle for keeping your MC4 connectors in place and tidy.

Dimensions:

Length 182mm

Width 95mm

25A DC DIN Mount Breaker 125V MCB C curve

Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.