Fully intelligent knob irrigation controller,
automatic watering device timer
- 1. Use two 1.5V AAA batteries;
- 2. Suitable for 0.5-4 kg water pressure;
- 3. Suitable for water temperature 5℃-40℃;
- 4. Programmable setting of watering time, standard clock time, etc.;
- 5. Full waterproof function.
Please read the following operating instructions carefully and correctly implement the provisions of each function in this manual, understand the characteristics of the product control device, and master the correct and safe use method. For safety reasons, minors are not allowed to use this watering control device.
Technical data
Liquid medium: clean water
Maximum water temperature: 0-40 degrees Celsius
Working pressure: 0.5-4 kg
The number of watering (can be controlled by the rotary switch), the shortest continuous output watering time of the specified method is 1 minute, and the longest continuous output watering time of the valve is 120 minutes.
Watering cycle (can be controlled by rotary switch), the shortest cycle time is 1 hour, and the longest cycle time is 7 days.
Power supply used: 3V, 2 AAA batteries, (2 AAA batteries)
How to use
Insert the battery (the first time the battery is inserted, the water valve will self-check once, and the valve ball will automatically turn to the closed state)
Turn the B rotary switch to the time point of the required cycle
A. Turn the rotary switch to the desired point in time for continuous watering
The water valve will automatically work according to the set program within 10 seconds
note:
The set cycle time cannot be less than the duration of valve opening output
Working pressure: 0.5-4 kg
The number of watering (can be controlled by the rotary switch), the shortest continuous output watering time of the specified method is 1 minute, and the longest continuous output watering time of the valve is 120 minutes.
Watering cycle (can be controlled by rotary switch), the shortest cycle time is 1 hour, and the longest cycle time is 7 days.
Power supply used: 3V, 2 AAA batteries, (2 AAA batteries)
How to use
Insert the battery (the first time the battery is inserted, the water valve will self-check once, and the valve ball will automatically turn to the closed state)
Turn the B rotary switch to the time point of the required cycle
A. Turn the rotary switch to the desired point in time for continuous watering
The water valve will automatically work according to the set program within 10 seconds
note:
The set cycle time cannot be less than the duration of valve opening output
When the B rotary switch is set to 0, the water valve is opened for watering only once
A. When the rotary switch is set to OFF, the water valve will close.
A. When the rotary switch is set to OFF, the water valve will close.
Packing:1PC
Warranty period: 120 days