CareSens N Blood Glucose Test Strips 100pk pack

No Coding Accurate Results

The CareSens N Blood Glucose test strip can be used with the CareSens N, CareSens N POP, CareSens N Voice, and CareSens N Premier meters. These strips don’t require coding, just insert the strip into the meter and it is ready to use. Test strips are available through the NDSS.

• 5 Second test
• 0.5 µL Sample
• Accurate results
• Automatically draws blood into test strips

Product Description

Directions

Preparing the lancing device:

1. Unscrew and remove the adjustable tip.
2. Insert a new disposable lancet firmly into the carrier.
3. Twist off and set aside the protective cover of the disposable lancet and replace the adjustable tip.
4. Set the depth of penetration that you want to use; in thicker skin areas use a higher number; in thin sensitive skin areas use a lower number. Rotate the top portion of the adjustable tip until the setting number matches the arrow.
5. Cock the lancing device by pulling on the sleeve until the device clicks.

Preparing the meter and test strip:

1. Wash your hands and the site from which the blood will be drawn.
2. Gently insert the square end of the test strip into the meter port with its contact bars facing upwards. The (strip with blood drop) symbol should appear on the screen.
3. Get a blood sample using your lancing device (see instructions above).
4. Touch the pointed tip of the strip into the blood droplet on your finger, keeping the test strip vertical to the blood droplet, making sure the blood fills up the small window on the black side of the strip. Note: You only need about 0.5μl of blood (about the size of a pinhead).
5. Once the blood sample has filled the confirmation window, the meter will beep. If the blood sample has insufficient volume, an error message will appear.
6. The test result will appear after the meter counts down from 5 to 1. The result will automatically be stored in the meter’s memory.

Usage Advice

Read and follow the enclosed instructions.
Store between 1-30ºC.
Do not freeze.
Tightly recap test strips vial immediately after use.
Dispose of test strips past the expiration date immediately.
Discard used test strips safely in an appropriate container.
Use the test strips according to the storage and handling methods to use them up until the expiration date

Disclaimer: 

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.