DC Boost Converter Step-up Power Supply Module 1500W 50A 12V-48V to 24V-70V New

Features
1. High conversion efficiency.
2. High power original device.
3. High power high current iron-silicon aluminium magnetic ring.
4. Thickened heat sink.
5. With intelligent temperature control electronic fan cooling.
6. Input MOS tube anti-reverse connection, (input is not afraid to connect the board).
7. Input undervoltage protection (with LED indication, voltage adjustable).
8. Input overcurrent protection (with LED indication, overcurrent point adjustable).
9. With over-temperature protection (with LED indication).
10. Output constant voltage and constant current with adjustable succession.
11. High reliability, stable work.
 
Specification
1. Name: High power DC boost module power supply.
2. Model: AP-D5060B
3. Input voltage: DC10.5V-60V.
4. Input current: 50A max.
5. Input power: 1500W max.
6. Output voltage: DC15V-70V.
7. Output current: 30A max.
8. Output power: 1360W max.
9. Conversion efficiency: 93-96% (efficiency and input and output voltage and current related).
10. Operating temperature: -20~50.
 
Main Uses
1. High power solar street light drive.
2. Large electromechanical equipment power supply.
3. Various motors, such as two-wheeled electric vehicles, three-wheeled electric vehicles, etc.
4. Car and various mobile equipment power supply.
5. DIY adjustable constant voltage and constant current power supply.
6. Solar and wind power charging.
7. Charging for various batteries.
 
Instructions for use
1. Input + is the power supply positive, input - is the power supply negative.
2. Output + for power supply positive, output - for power supply negative.
3. Adjustable range of undervoltage: DC10.5V-44V (clockwise adjust small, counterclockwise adjust large), first of all, the undervoltage can be adjusted to the minimum, and then the input voltage to the undervoltage protection value you need, and then slowly counterclockwise can be adjusted larger, when adjusted to the undervoltage indicator light and then back to adjust a circle, re-energize can be.
4. Constant voltage adjustable range: DC15-70V (clockwise adjust smaller, counterclockwise adjust larger), please adjust the voltage to the voltage you need when the output is idle and then turn on the load (constant voltage power supply should be adjusted to the maximum constant current,).
5. Constant current adjustable range: 2A-30A (clockwise adjust small, counterclockwise adjust large), first no-load the output voltage to the voltage required by the load (no-load voltage should be 2-3V higher than the load voltage when constant current), adjust the current to a minimum, in the output series into an ammeter, and then slowly the current to the current required by the load.
8. The power supply has an input overcurrent protection function (adjustable overcurrent point), the red light is on when the overcurrent protection.
9. The power supply with intelligent temperature control fan, when the power supply temperature reaches about 60 degrees, the fan automatically turns on, when the power supply temperature drops to about 50 degrees, the fan automatically turns off.
10. The input voltage should not be lower than 10.5V or more than 60V, (please reduce the load when the input voltage is lower than 12V).
11. The maximum input current should not exceed 50A and the power should not exceed 1500W.
12. Use must ensure that the input voltage is more than 2V lower than the output voltage.
13. When using switching power supply or other secondary power supply, please ensure that the power supply power should be more than double the power of this module power supply.
14. Power supply overcurrent or undervoltage protection, the output there is close to the input value of the voltage, the protection is only the power supply does not boost.
15. The output indicator will only light up when the power supply has a boost.
16. Important note: please try not to use the input below 20V, the output of 60V or more with a full load, in the input and output voltage difference should be appropriate to reduce the output power, the greater the pressure difference between the power supply efficiency is smaller.
17. Output with load instructions: when input 12V (input current 50A, output 60V or less, output can carry about 550W load), when input 24V (input current 50A, output can carry about 1100W load), when input 36V (input current 41.6A, output can carry about 1360W load), when input 48V (input current 31A, output can carry a load of about 1360W)
 
Key Notes
1. The parameters marked in this power supply are the maximum values, and must not exceed the maximum values when used
2. The maximum value measured by this power supply is for purely resistive loads. When using capacitive and inductive loads with high starting currents, please pay attention to reducing the load appropriately.
3. Battery input can directly drive electric vehicles
12V input (can drive electric vehicles up to 400W)
24V input (can drive electric vehicles up to 600W)
36V input (can drive electric vehicles up to 800W)
48V input (up to 900W)
4. Load capacity at different input voltages (pure resistive load)
At 12V input, output can carry a load of up to 560W
24V input (up to 1100W)
At 36V input, the output can carry a load of up to 1360W
 
Caution:
1. when the output voltage is higher than 36V (human body safety voltage), please do not contact with electricity to avoid human body electric shock.
2. Input and output cannot be reversed.
3, when the input high current, to tighten the terminals, the input wire should be selected more than 4 square.
4. The output can not be short-circuited, short-circuit is very easy to damage the power supply, because it is difficult to make the output short-circuit protection.
5. When working input and output voltage and current should not exceed the maximum, so as not to damage the power supply.
6. Pay attention to ventilation and heat dissipation when working under full load for a long time, in order to extend the service life of the power supply.
7. Pay attention to dustproof and moisture-proof.
 
Package List:
1x Boost Module

1,We will arrange shipping for you within 24 Hours after payment cleared except the holidays.

2,We only ship to the confirmed address provided by PayPal. Before you pay, please make sure your address in PayPal matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

3,we will ship out the order in 1-2 business days after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.

4,We ship items to Worldwide. Thank you!

We accept PayPal payment ONLY.

If you  do not have Paypal account, please registered with (http://www.paypal.com)  Payment must be received within 5 days after auctions ended. Please do not  bid if you are not intending to buy. Unpaid dispute will be filed to ebay  for the non payable bidders.

  • We  are not responsible for custom duty or import  tax.

  • We will leave POSITIVE FEEDBACK  after receiving the payment. Please contact us if  your are  not satisfied with the item after receive  it.

  • We could offer  refund,  and refund request is available only requests  within  a week after parcel received & returning the  item as  the same condition as received.

  • We offer 100% refund if the item is broken before  arrival,  all you need to do is sending us the clear  pictures  to show it is broken. Defective situation must be  noticed within 7 days after delivery.

  • All emails will be answered within  1  business day. If you do not receive our reply,  please kindly re-sent your email,and we will reply  to you as soon as possible.

  • All items sold by us  are being described to the best of our abilities, as  accurate as possible, and with utmost  conscientiousness on our part.However, to avoid any  potential oversights, I respectfully request your  assistance in helping us to make this a mutually  satisfactory transaction by Thoroughly reviewing  item description and photos, and asking all  questions Prior To Bidding.

  • Please Note that size  and color representation are subject to  manufacturing variance and may not be exact. Also  note that monitor settings may vary from computer to  computer and may distort actual colors. Please read  these terms thoroughly before placing your bid. 

  • We will automatically  leave a positive feedback to everyone who has  complete the transaction and leave us positive  feedback.

  • Please do not forget  to give us Five Stars on all of the Detailed Seller  Ratings. Thanks!

  • In the unlikely event  you are not satisfied with the transaction, please  contact us before you sumbit your evaluation. We  believe that everything could be solved by  communication.
    1.in order to provide you the best  service*****,please treat the transaction  fairly.*feedback is simply what we pursue.
    2.Please Do contact us first to get a better  solution before you would leave a *neutral or  *negative feedback
    3.We strive for 5-star service by stating upfront  our policies, our shipping rate& our shipping  frequency. if you were pleased with this  transaction, please respond with all 5 stars! if you  are not pleased, simply let me know via e-mial  rather than leave low score, and I'll work to make  it that way
    4.Please email me through 'MY MESSAGES' or "Ask  Seller Questions" if you have any question about our  listing or your purchase

DataCaciques