** This product is in Australia, usually you can receive it in 3-5 days.
Gas Metal Melting Furnace is used to melt copper, brass,gold, silver,aluminum, zinc, tin and other metals with melting points below 1300 ° C(2372 ° F). Suitable for most fuels, liquefied gas,LPG, propane, etc. But it can not melt steel, iron.
Many other people's
single burner furnace has a problem, the flame can only heat one side of
crucible strongly ,especially if you use a big size crucible, the
flame can only reach to 1/3 or 1/2 wall of the crucible, the opposite
side has no flame. So we often saw that some part of metal in crucible
has been melted, but some other part is not yet. It means you need
longer time and more gas to melt whole pot of metal, my dual burners have
solved this problem by heating 2 sides of crucible at the same time, it
can save 50% time and 20% gas cost. As we know, 40%--70% gas energy is
actually escaping in heating process, that is a big waste . So if you melt
fast, you save more propane cost.
Package includes all of items
in my 1st photo,including crucible,casting mold, tongs ,gloves,fire
brick,hose & hose clamps,instruction manual.
1. Furnace body is made
of stainless steel( 1mm thick), no need painting, highly resistant to
corrosion, superior strength and durability; Can bear the weight of one
adult.
2. Dual gas burners are made of stainless steel,each burner is
around 100,000 BTU ,fast melting can save 50% time and 20% gas cost ;
3. Outside Dimensions : 10" diameter x 12" height (25cm x 30cm);
4. Inner Dimensions: 8" diameter x 7.6"Height (20cm x 19cm);
5. Adjustable High Pressure Propane Regulator 0--30 psi , 5 ft long (150cm). The end connects a standard size propane AU POL. Fit with Australia gas tank.;
6. Crucible can load 8 kg brass or 2.5 kg aluminum or 10 kg silver;
7. Graphite casting Mold: 113 ML capacity, size is 125*60*40 mm, can melt 2 kg gold, 1.2 kg silver, 1kg copper.
8. Lifting and Pouring tongs set.
9. Furnace body is fully lined with 1 inch of ceramic fiber insulation and
lid is fully lined with 2 inch of ceramic fiber insulation. Furnace
floor lined with 3 inch of ceramic insulation and firebrick .You only
need a propane gas bottle/tank ( like 20,30 or 50 LB ).
Our special advantage:
1.
Furnace body is made of stainless steel ( 1mm thick) ,easy to
clean,highly resistant to corrosion, lightweight and strong enough for a
people to stand on the body, see my Ebay photo. superior strength and
durability. Other seller's black oil painting is easily burnt or
discolour in long time using.
2. Dual burner can save 50% time and 20% gas cost.
3.
Many other seller's burner head may be melted damaged after long time
using in high temperature flame ,so you had to change the whole burner.
But our bell shape burner head can be changed because it is connected by
thread, you can buy replacement in local shop cheap and easily .
4. You also can use only one burner by shut off the valve ,and block one hole on furnace body with ceramic wool.
Kind remind:
1. Do not use it to melt iron, that will shorten the life of the furnace.
2. Graphite crucible is consumable, you can change a new one according to your requirement.
3. Use safety goggles, mask as well as gloves while casting metals.
4.
The ceramic insulation blanket is not asbestos . Asbestos has been forbidden many years ago.
* Orders Shipping within 1 or 2 day.
* Your address should not be PO Box , please give me an address with door and street. Additional AU$10--20 shall be charged for remote areas.
* 30 days for an exchange, refund or return from service of our AU warehouse.