Description:
This electronic fuel pumps are great as stand-alone or booster pumps, are self-priming, and have a simple 2-wire design. They work with 12 V negative-ground systems and include mounting hardware.
SPECIFICATION:
• Designed to provide efficient fuel transfer
• Suitable for 12 volt negative system ground
• Easy to install
• Backed by a limited warranty
• Ideal as a fuel transfer pump
• Dependable construction
• Quiet operation
• Self priming
• Gasoline only
• Pumps 4 to 7 PSI
• Flow rate is 35 gallons per hour (GPH)
• Inlet and outlet size is 5/16 inch
Features:
Universal Fit - Most Domestic 4,6 & 8 Cylinder Carburetor Applications
Flow Rate Of 35 GPH
Fuel Pressure Is 4-7 PSI
Internally Regulated
5/16" I.D. Hose
Must Be mounted Within 12" Of Fuel Tank
For Use With Gasoline Only
Not For Fuel Injected Engines
Not Designed For Use On Aircraft Of Any Type
DESCRIPTION:
1. Application: Universal for carbureted applications on most 4, 6 and 8 cylinder vehicles .
2. Shut off pressure: 4-7 P.S.I.(Gasoline); Voltage: 12V ; Flows: 35(GPH); Package: Fittings*1 and mounting hardware *2 .
3. Eliminates vapor lock and flooding, comes with a self-priming pump,works well as a fuel transfer pump or booster pump .
4. TS16949 quality system certified manufacturer. every single pump is 100 percent tested throughout the entire manufacturing process for worry free, out-of-the-box performance .
5. Must Be mounted Within 12" Of Fuel Tank
6. For Use With Gasoline Only
7. Notes:The inlet hose barb screws into the pump housing with 1/8 in. NPT threads.
8. Universal Fit - Most Domestic 4,6 & 8 Cylinder Carburetor Applications
NOTE:
1. Forbid to pump the water, alchol and the fuel contains many impurities.
2. Please check the pumps shut off pressure in our description, make sure it is your best choice.
3. Pumps require approximately one amp average draw at maximum delivery.
TECHNICAL FEATURES:
Part Type:Fuel Pumps, Electric External
Product Line: Micro Electronic Fuel Pumps
Free Flow Rate:35 gph/132 lph
Maximum Pressure (psi):7 psi
Inlet Size:5/16 in.
Inlet Quantity:One
Inlet Attachment:Female threads
Outlet Size:5/16 in.
Outlet Quantity:One
Outlet Attachment:Female threads
Quantity:Sold individually.
Notes:The inlet hose barb screws into the pump housing with 1/8 in. NPT threads.
Universal Fit - Most Domestic 4,6 & 8 Cylinder Carburetor Applications
Flow Rate Of 35 GPH
Fuel Pressure Is 4-7 PSI
Internally Regulated
5/16" I.D. Hose
Must Be mounted Within 12" Of Fuel Tank
For Use With Gasoline Only
Must Be mounted Within 12" Of Fuel Tank
For Use With Gasoline Only
Not For Fuel Injected Engines
Not Designed For Use On Aircraft Of Any Type
(if you want the pump used for diesel only,you can find it in our ebay store or search auction #https://www.ebay.com/itm/291916987224)
Not For Fuel Injected Engines
Not Designed For Use On Aircraft Of Any Type
PACKAGE INCLUDED:
1. Micro external pump*1pcs
2. Fittings*1pcs
3. Bolts*2pcs
4. Yellow Caps*3pcs
CAN BE USED FOR:
original equipment replacement on carbureted cars, trucks, industrial
equipment and farm equipment, including lawn and garden.
It also works for fuel transfer systems in gasoline
applications as well as a booster pump for an existing
mechanical fuel pump. Pump is self-priming, with a two
bolt and two wire installation. Average 2 amp draw at
maximum delivery.
NOTE!!!
The product detail description and pictures that it showing 3/8", that meaning inlet/outlet Dim, not the using hose ID,
actually we should be using 5/16" ID hose. If inlet and outlet are straight tube(5/16"), when we install the hose to connecting the inlet/outlet, that it will be easily to pull-out and leakage. so the hose bard is bigger than hose ID, that will be safty! It is a standard spec
Why choose us?
1)This Electric Fuel Pumps eliminates vapor lock and flooding. Micro electric fuel pump works well as a fuel transfer pump and makes a great stand-alone or booster pump.
2)It comes with a self-priming pump with simple two-wire design. Micro electric fuel pumps works on 12 volt negative ground systems only.
3)It also includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery.
4)It is a universal design for most domestic 4, 6, and 8 cylinder carburetor applications.
About Service & Contact:
If there are any item or delivery problems, please use email to contact us first BEFORE you leave neutral or negative feedback, so that we can address your concerns.
Please give us the opportunity to resolve any problem.
We will response your email within 24 hours.
We hope you have a pleasant shopping experience with us.
