DC Motor Speed Controller Remote Control DC Motor Forward and Reserve Controller DC6-40V 5A Motor Speed Regulater with Limit
Specifications:
Working voltage: DC6V-40V
Rated current: 5A
Module power consumption: 0.6W(excluding load motor), static 0.1W
Signal input: The low level is active, and the input is the negative terminal of the optocoupler. voltage below 2V is considered signal
Response speed: K1, K2, 20ms, SW1, SW2, 50ms
Operation life: more than 150,000 times
PCB size: 83*46*20 (mm)
Frequently Questions:
1. What is the difference between self-locking mode and point-moving mode?
Self-locking mode, press the external positive switch (K1), the motor is turning, release K1, the motor is still turning. It will not stop until it encounters a reverse signal (K2) or a forward stop signal (SW1); The reverse is also true.
Click mode, press the external positive switch (K1), the motor is turning, release K1, the motor stops immediately; The reverse is also true.
2. What are the requirements of the signal? Can the sensor be connected?
The signal is effective at low level, and can be a three-wire sensor (NPN-NO type), K1, K2, SW1, SW2 are all of this specification.
3. Is the point mode lower limit signal effective?
Effective, for example K1 has a signal, then it will turn forward, but SW1 limit also has a signal, then it will stop (not turn forward).
4. What is the limit signal?
The limit signal can also be called a stop signal. The limit signal is trigger type and level enabled. For example, when you encounter a short limit signal while turning forward, it will stop, even if the limit signal disappears, it is still stopped. The signal must be turned forward again in order to turn forward again.
5. What is the input and output voltage?
The input voltage range of the product is 4V-40V, but in order to ensure reliable operation, it is recommended to use in the range of 6V-36V. It is not necessary to indicate 12V or 24V when purchasing, because they are in the range, this module is a wide voltage. The output voltage is the same as the input voltage.
6. Can drive a large motor?
The maximum current of the product at 12V voltage is 20A, and the maximum current is 10A when the use voltage is 24V. The maximum drive motor power is generally not more than 80W, it is recommended to take the motor locked-in motor prevail.
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 1-3cm differences due to manual measurement.
Package Included:
1x Controller
1x Remote Control(Battery not included)