Description
GEPRC CineLog35 Analog VTX FPV Quadcopter FPV Racing Drone for TBS Nano RX 6S Version (XT60)
Features:
- 3.5" integrated protection guards ensure flight safety.The new design has significant roles at many aspects such as low noise, vibration and noise reduction, and durable high-strength structural design
- Comes with a 3D printed mount to install camera for GoPro10. And its specific base can be used to install cameras for Naked GoPro Hero 8, Insta 360 GO2, and Caddx Peanut
- Gimbal design with better shock absorption performance and its shooting effect is more stable and clear
- GR2004 motors with D90-3 propellers provide strong power output.
- Independent receiver cabin for convenient and fast binding
- It has been debugged, and the overall flight feel is delicate and flexible
- Flip-chip design: Compared with the traditional full-mounted motor, it has better flight efficiency and improved flight time
- High-performance flight control: extremely high computing speed and 5 sets of UART ports
- Excellent compatibility: For GoPro10, 9 and 8 as well as for Naked GoPro Hero 8, Caddx Peanut camera, and Insta360 Go2
Main Parameters:
- Frame: GEP-CL35
- Wheelbase: 142mm
- Top plate: 2.5mm
- Bottom plate: 2.0mm
- Arm plate: 3.5mm
- FC system: GEP-F722-45A AIO
- MCU: STM32F722
- Gyro: 6-Axis
- OSD: For BetaFlight OSD w/ AT7456E chip
- ESC: BLheli_S 45A
- Propeller: D90-3
- Optional receiver: PNP (without receiver), for Frsky R-XSR, and for TBS Nano RX
Technical Parameters (CineLog35 Analog):
- Model: CineLog35 Analog
- Propeller: GemFan D90-3
- Wheelbase: 142mm
- Antenna: Momoda MMCX RHCP
- Image transmission: 5.8G 600mW VTX + for CADDX Ratel2
- Motor: GR2004-1750KV (6S version); GR2004-2550KV (4S version)
- Flight control: F722-35A-AIO
- Size: 203 x 203 x 42mm
Package Included:
- 1 x CineLog35 analog quadcopter
- 2 x Pairs of D90-3 propellers
- 1 x Battery strap 15x200mm
- 2 x Battery silicone pads
- 2 x Landing pads
- 4 x 15 degrees damping rings
- 1 x 3D printed mount combination
- 1 x Screw combination
- 1 x Screwdriver combinations
- 1 x OSD menu board
- 1 x Antenna fixed tube
Note:
- Battery is not included. LiPo 4S 850mAh-1500mAh with XT60 is recommended for 4S version, and LiPo 6S 850mAh-1100mAh is recommended for 6S version.
Features:
- 3.5" integrated protection guards ensure flight safety.The new design has significant roles at many aspects such as low noise, vibration and noise reduction, and durable high-strength structural design
- Comes with a 3D printed mount to install camera for GoPro10. And its specific base can be used to install cameras for Naked GoPro Hero 8, Insta 360 GO2, and Caddx Peanut
- Gimbal design with better shock absorption performance and its shooting effect is more stable and clear
- GR2004 motors with D90-3 propellers provide strong power output.
- Independent receiver cabin for convenient and fast binding
- It has been debugged, and the overall flight feel is delicate and flexible
- Flip-chip design: Compared with the traditional full-mounted motor, it has better flight efficiency and improved flight time
- High-performance flight control: extremely high computing speed and 5 sets of UART ports
- Excellent compatibility: For GoPro10, 9 and 8 as well as for Naked GoPro Hero 8, Caddx Peanut camera, and Insta360 Go2
Main Parameters:
- Frame: GEP-CL35
- Wheelbase: 142mm
- Top plate: 2.5mm
- Bottom plate: 2.0mm
- Arm plate: 3.5mm
- FC system: GEP-F722-45A AIO
- MCU: STM32F722
- Gyro: 6-Axis
- OSD: For BetaFlight OSD w/ AT7456E chip
- ESC: BLheli_S 45A
- Propeller: D90-3
- Optional receiver: PNP (without receiver), for Frsky R-XSR, and for TBS Nano RX
Technical Parameters (CineLog35 Analog):
- Model: CineLog35 Analog
- Propeller: GemFan D90-3
- Wheelbase: 142mm
- Antenna: Momoda MMCX RHCP
- Image transmission: 5.8G 600mW VTX + for CADDX Ratel2
- Motor: GR2004-1750KV (6S version); GR2004-2550KV (4S version)
- Flight control: F722-35A-AIO
- Size: 203 x 203 x 42mm
Package Included:
- 1 x CineLog35 analog quadcopter
- 2 x Pairs of D90-3 propellers
- 1 x Battery strap 15x200mm
- 2 x Battery silicone pads
- 2 x Landing pads
- 4 x 15 degrees damping rings
- 1 x 3D printed mount combination
- 1 x Screw combination
- 1 x Screwdriver combinations
- 1 x OSD menu board
- 1 x Antenna fixed tube
Note:
- Battery is not included. LiPo 4S 850mAh-1500mAh with XT60 is recommended for 4S version, and LiPo 6S 850mAh-1100mAh is recommended for 6S version.
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Mar 27, 2023 at 20:25:36 PDT, seller added the following information:
