Description
1.6-50MHz 200W Power SWR Meter Pro HF PWR SWR Meter with 1.29 Inch OLED Digital Display Screen
Features:
- It is a 200W digital power standing wave meter and HF shortwave power meter.
- Upgraded hardware, 200w measurement range and 1.29-inch large OLED display screen.
- Improved firmware, new fitting algorithm and multi-point correction algorithm. Its display modes include normal mode and peak hold mode. Multi-interface display mode all adds dynamic analog display bar, and the power status is more intuitive under SSB.
- Fitting algorithm (according to the characteristics of detection diode) + multi-point correction algorithm + dual reference segment detection make the accuracy better than 5% over the entire power range of 0.5W to 200W.
- There are 5 interface display methods.
- High-speed average detection mode and real-time efficiency display.
- When standing wave ≥ 2.0, it will enable intermittent beep alarm. When standing wave ≥ 3.0, it will trigger continuous beep alarm.
- With built-in lithium battery, it can be used for more than 50 hours on a single charge.
- Multi-function button makes use more fun and adds one more way to interact for functions in the future.
Specifications:
- Frequency range: 1.6-50MHz
- Power measurement range: 0.5W-200W
- Standing wave measurement range: 1.0-99.9
- Insertion loss: < 0.12dB
- Insertion of standing waves: ≤ 1.02 at 1.6-30MHz; ≤ 1.05 at 30-50MHz
- Measurement accuracy: better than ±5%
- Impedance: 50Ω
- Standing wave alarm: when standing wave ≥ 2.0, it will enable intermittent beep alarm. When standing wave ≥ 3.0, it will trigger continuous beep alarm. The alarm can be turned off
- RF interface type: SL16-M or N (default M)
- Display content: forward power, standing wave, antenna-end power and efficiency
- Power supply: built-in rechargeable lithium battery or USB type-c
- Power consumption: < 0.1uA
- Screen size: 1.29 inches
- Screen type: OLED
- Data communication: USB type-c
- Firmware upgrade: Support
- Dimensions: 88 x 38 x 64mm/3.5 x 1.5 x 2.5" (excluding protrusions)
Attention:
- The above parameters are measured by professional instruments and are true and effective. It can be used continuously for 200W detection for a long time. More than 500W will damage the detection components.
Package Included:
- 1 x Power SWR Meter
How to Use?
- Long press its switch to turn it on and off. Short press the button to switch display interfaces. Double clicks to switch standing wave alarm. Three clicks to switch between normal mode and peak hold mode.
- There are 5 display interfaces which can be automatically saved. They can be automatically recalled next time when it is turned on.
- Red light is on when the meter is charging. The light will go out when the meter is fully charged.
Features:
- It is a 200W digital power standing wave meter and HF shortwave power meter.
- Upgraded hardware, 200w measurement range and 1.29-inch large OLED display screen.
- Improved firmware, new fitting algorithm and multi-point correction algorithm. Its display modes include normal mode and peak hold mode. Multi-interface display mode all adds dynamic analog display bar, and the power status is more intuitive under SSB.
- Fitting algorithm (according to the characteristics of detection diode) + multi-point correction algorithm + dual reference segment detection make the accuracy better than 5% over the entire power range of 0.5W to 200W.
- There are 5 interface display methods.
- High-speed average detection mode and real-time efficiency display.
- When standing wave ≥ 2.0, it will enable intermittent beep alarm. When standing wave ≥ 3.0, it will trigger continuous beep alarm.
- With built-in lithium battery, it can be used for more than 50 hours on a single charge.
- Multi-function button makes use more fun and adds one more way to interact for functions in the future.
Specifications:
- Frequency range: 1.6-50MHz
- Power measurement range: 0.5W-200W
- Standing wave measurement range: 1.0-99.9
- Insertion loss: < 0.12dB
- Insertion of standing waves: ≤ 1.02 at 1.6-30MHz; ≤ 1.05 at 30-50MHz
- Measurement accuracy: better than ±5%
- Impedance: 50Ω
- Standing wave alarm: when standing wave ≥ 2.0, it will enable intermittent beep alarm. When standing wave ≥ 3.0, it will trigger continuous beep alarm. The alarm can be turned off
- RF interface type: SL16-M or N (default M)
- Display content: forward power, standing wave, antenna-end power and efficiency
- Power supply: built-in rechargeable lithium battery or USB type-c
- Power consumption: < 0.1uA
- Screen size: 1.29 inches
- Screen type: OLED
- Data communication: USB type-c
- Firmware upgrade: Support
- Dimensions: 88 x 38 x 64mm/3.5 x 1.5 x 2.5" (excluding protrusions)
Attention:
- The above parameters are measured by professional instruments and are true and effective. It can be used continuously for 200W detection for a long time. More than 500W will damage the detection components.
Package Included:
- 1 x Power SWR Meter
How to Use?
- Long press its switch to turn it on and off. Short press the button to switch display interfaces. Double clicks to switch standing wave alarm. Three clicks to switch between normal mode and peak hold mode.
- There are 5 display interfaces which can be automatically saved. They can be automatically recalled next time when it is turned on.
- Red light is on when the meter is charging. The light will go out when the meter is fully charged.
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
