2nd Generation Motorcycle LED Flashing Tail Light with Turn Signals for HONDA 03-09 VTX1300R,VTX1300S,VTX1300T, 02-08 VTX1800R,VTX1800S,VTX1800T (NOTE!:it does not fit VTX1300C and VTX1800C,for their listings please message us) Smoke Lens Features and benefits: · 2nd Generation LED Design(Bright2wheels-ITU) – This rear tail lot is designed to help improve your riding safety by flashing 6 times the moment you active the brakes. After 6 flashes the brake will continue to show a solid red color to warn approaching drivers. · Integrated LED Tail Lights with Signals – An OEM-quality replacement our LED motorcycle tail lights produce a bright, easy-to-see LED color during braking and boasts built-in amber led turn signals for a streamlined look. · Maximum Quantity High-Brightness Led installed,80pcs Red LEDs, 64pcs Amber LEDs, Improves visibility and appearance · Quick and Easy Installation – Offering near plug-and-play use for both the red led running light and the brake light,our motorcycle tail lights offer a universal fit and come with connectors, resistors, and relays as necessary for a simple install. · Warranty: 6 months; Our outstanding advantages: Installation of Built-in turn signals (Optional: activate it only it will not conflict with laws in your country please refer to below links for more details) Connect the two YELLOW wires to the positive turn signal wires using provided red connectors or alternately use your existing factory connectors. Ground wire is not needed unless you are using resistors to slow down the blinking rate. The ground wire is the same color wire used on both turn signals. To remove the error code on dashboard or slow down the blinking rate use our provided resistors or relay if necessary: Wiring Diagram applicable to most bikes: Black Wire(Negative), Green Wire(Brake) Red Wire(Running Light) 1. Connect one end of the resistor to the ground wire on your turn signal harness from your bike. 2. Connect the other end of the resistor to both the YELLOW wire from our taillight and the positive turn signal wire from your turn signal harness from your bike. 3. Repeat the same process for the other side. To use the red connectors, place one wire inside along one channel, place another wire inside along the other channel. Push down the metal pin as it will make a small cut on each wire bridging the connectors. if you are using the resistors, place one end of the resistor in the middle of either channel along with the one wire. About us We are a factory specializing in the production of various motorcycle accessories Because there are too many products, we can't upload them all If you have any needs, you can ask us at any time The team leader or dealer is welcome to consult The parts you can't find can be found here. The parts you can find elsewhere will be cheaper here We also support small batch customization. It will be cool to add your own name or logo Finally, let's enjoy the fun brought by the locomotive~
•Free Shipping to domestic addresses
•We dispatch Our Order within 1 working day(Monday-Friday, Excl. holidays)