Paros Motorcycles Titanium Drain/Sump Bolts are manufactured from grade 5 Titanium Ti-6AL-4V and are suitable to replace both grade 5 and grade 8 steel bolts,

We have them machined to incorporate a magnet at the tip which is designed to capture any particles or metal shaving that may be present as a result of general wear and tear in your motor. This magnetised steel stud will help protect your engine. Once the titanium drain/sump bolt has been machined we drill the bolt head to enable lock wiring if required as an additional safety mechanism in the event the bolt may become loose.

Head Style: Hex Head Race Drilled Thread

Diameter: 14mm

Thread Pitch: 1.50mm

Thread Length: 12mm

Head Diameter: 21mm

Head Height: 8mm

Length: 12mm

Magnet Pin Length: 6mm

Socket Size: 17mm

Pack Quantity: 1

FITS THE FOLLOWING MODELS:

*DISCLAIMER PLEASE CHECK THE MAGNET PRIOR TO INSTALLING, WE CHECK EVERY MAGNET TO MAKE SURE THEY ARE GLUED IN PROPERLY BUT PLEASE DOUBLE CHECK YOUR MAGNET PRIOR TO INSTALLATION AND PERIODICALLY WHEN SERVICING.

ERGO 5800 metal glue made in Switzerland is the glue adhesive used to secure the magnet in place, we recommended this glue if your magnet ever becomes loose for any reason. Or similar such as Loctite 480 instant metal magnet adhesive.