Head with precision milled dovetail slide may be tilted through 90° to give all-round versatility: diagonal drilling, versatile without the need of special milling bits, milling diagonal slots.
Fine feed selectable, allowing fine head feed for milling. With dial and depth scale. Geared rack and pinion feed for effortless drilling with 65mm stroke. 45mm diameter drill column, 500 mm long. Approximately 140mm throat. Machined, solid baseplate approx. 200 x 300mm. All drills with standard 43mm spindle collars may be utilised directly: Bosch, Metabo, Matika, Skil etc.
With precision milled dovetail slides, this is also suitable for metal work. For routing, milling, slotting of steel, non-ferrous metal, plastic and wood. Each slide provided with locking screws. Dovetail fittings/gib strips adjustable to eliminate play. Feed adjustments by means of 2 hand wheels with adjustable, graduated dials (one graduation = 0.05mm, 1 revolution = 2mm). Machined table, 3 T-slots for fastening machine vices and clamping kits. Fence supplied with pre-drilled positioning holes, including 45°, fastenings screws and clamp used for routing. Table 200 x 200mm. Max. travel 150 x 150mm. Overall height 75mm. Weight 4.9 kg.
With controller for speeds of 900 - 6,000rpm. The triple ball bearing armature provides direct drive (no gearing). This yields virtually vibration-free operation and extremely high spindle accuracy. Aluminium die-cast head with spindle neck of 43mm (European standard). Remainder of casing is fibreglass reinforced nylon. Large, easy to use switch with emergency function. Chart indicates optimum speeds for milling and drilling of various materials.
Technical Data:
Control unit with full wave electronics for 230V, 40VDC secondary voltage. Power consumption up to max. 250W. Spindle speed infinitely variable between 900 and 6,000rpm. Complete with triple slit, hardened collets covering 2.35, 3.0, 3.2, 4.0, 5.0 and 6.0mm, as well as spanners. Weight 4.2kg.
N.B. The motor operates at 40V, supplied from the power pack/controller. At this level, the control characteristics
are ideal and yield high torque, even at lower speeds. (The compound table, drill stand and clamps are not included).
Nett Weight | 4.2 kg |
---|---|
Rating | Home/Light Trade |
Spindle Speed | 900 - 6,000 rpm |
Voltage | 230 V |