• Compatibility Vehicle:
  •  
  • 2002-2004 Infiniti I35
    2002-2003 Nissan Maxima 
  • About Cooling Fan:
  • -OE design to ensure exact fit, form and function for an easy drop-in installation;
  • -ISO 9001 certified manufacturing plants;
  • -ABS Plastic with Metal Motor;
  • -Built to strict quality control standards;
  •  
  • About Radiator

    • Electric Radiator & Cooling Fan Assembly Kit For 2002 2003 2004 Infiniti I35

    Compatibility Vehicle:

     

    2002-2004 Infiniti I35
    2002-2003 Nissan Maxima

     

    About Cooling Fan:

    -OE design to ensure exact fit, form and function for an easy drop-in installation;

    -ISO 9001 certified manufacturing plants;

    -ABS Plastic with Metal Motor;

    -Built to strict quality control standards;

     

    About Radiator

    The radiator is a main part of the cooling system. Coolant flows through the tubes inside the radiator, which are surrounded by fins that direct airflow. When the vehicle is moving down the road, air flows through these fins and cools the coolant. The lower temperature coolant is then sent back to the engine. A failed radiator can lead to engine overheating and potential engine damage. 

     

    How to Replace the Cooling Fan?

    Step 1 - Locate and disconnect the electrical connector for the cooling fan.


    Step 2 - Remove the lower mounting bolts that attach the fan to the radiator. (Note: Some vehicles have alignment dowels which need not be removed.)


    Step 3 - Remove any weather stripping that will help access the cooling fan. (Note: This is not needed on most vehicles.)


    Step 4 - Loosen mounting bolts or clips to remove any plastic shielding that will inhibit the replacement of the cooling fan.


    Step 5 - Once all mounting bolts have been removed, lift the plastic covering from the vehicle.


    Step 6 - After the plastic covers have been removed, loosen and remove the core support mounting bolts. (Note: This is not needed in some vehicles.)


    Step 7 - Next, lift the core support from the vehicle. (Note: A hood cable release could be mounted to this support.)


    Step 8 - Then, loosen the upper radiator hose clamp using a hose clamp tool or channel locks.


    Step 9 - Once the clamp has been loosened, grasp the hose and twist using a hose pick or screwdriver to assist. Have a fluid catch basin ready as coolant will leak out. (Note: Depressurize or drain the radiator if needed. Radiator replacement.)


    Step 10 - After the upper radiator hose has been removed, undo the mounting clips or bolts that hold the air intake in position. (Note: This step needed only if the air intake is blocking the removal of the cooling fan.)


    Step 11 - Next, loosen and remove the upper mounting bolts from the cooling fan radiator mount.


    Step 12 - Once all mounting bolts and clips have been removed, gently lift the cooling fan from the engine bay. Use caution when performing this action as to not damage the radiator cooling fins.


    Step 13 - After the failed cooling fan has been removed, compare the old fan to the replacement cooling fan. Inspect mounting tabs and electrical connector to ensure proper installation. (Note: Some cooling fan designs feature the replacement motor separate.)


    Step 14 - Gently lower the new cooling fan down into the engine bay and onto the radiator. Again, use caution when performing this as not to damage the radiator cooling fins.) Reassembly all mounting bolts etc., refill cooling system and check the coolant reservoir, add fluid as needed.

     

    Radiator Replace Steps

    1.Raise and support the vehicle, Open the petcock valve or remove the lower radiator hose to drain the coolant from the radiator.


    2.Disconnect the radiator reservoir hose, Remove the upper and lower radiator hose.


    3.Disconnect the cooling fan electrical connector, Remove the cooling fan mounting bolts, Remove the cooling fan. 


    4.Disconnect the transmission cooler lines. Remove the radiator mounting bolts, Remove the condenser mounting bolts, Remove the radiator from the vehicle.


    5.Mount the radiator. Mount the new radiator in position.


    6.Install the condenser mounting bolts and tighten them down, Install the radiator mounting bolts. 


    7.Connect the transmission cooler lines, Mount the fan. Mount the cooling fan in position, Install the cooling fan mounting bolts, Reconnect the cooling fan electrical connector. 


    8.Slide the hose onto the connection. Install the upper and lower radiator hose. Connect the radiator reservoir hose. Close the drain petcock as needed. Then fill the radiator with coolant.


    9.Bleed the air from the cooling system. 

     

    Tools and Supplies Needed:

    1.Socket set

    2.Wrench set
    3.Replacement cooling fan
    4.Fluid catch basin
    5.Protective eyewear and gloves
    6.Hose clamp tool or channel locks

     

    FAQ Anwser

    1.About shipping: We have two warehouses in US, one is located in CA, and other one is located in GA. We will dispatch packages from the nearest in stock warehouse by recipient's address accordingly. Up to 99% Orders could be shipped within 24 hours after payment completed. 

    2.About incompatibility parts received: Please provide us with detailed vehicle information including Year/ Made/Model/Trim and Engine, or VIN#. With these information, we could try to help to find out a correct OE# part or exchange a right one for you if we have it in stock.

    3.About damaged package: Please take some photos of the damage part and send to us, we will inspect it carefully and confirm with engineer if the damage will cause functional or installation issues or not. For serious damage radiator, we could do resend a new one or issue refund as compensation. 

    4.About shipping method: UPS, FedEx, USPS are available here and we will choose one of them according to the part you order, for generally speaking, the delivery time is about 3 to 8 working days.

    5.Why choose us: Professional auto parts seller, Premium Quality Products, Excellent service, Satisfactory shopping experience.

     

    6.Other questions: Please message us before order.

     


    Item Specifics
    Brand Autocoolinghome
    Manufacturer Part Number 837545-cooling
    Condition New
    Warranty 1 Year
    Interchange Part Number Engine Radiator and Cooling Fan Assembly
    Other Part Number Electric Radiator Cooling Fan Assembly Kit
    Superseded Part Number Electric Engine Radiator & Cooling Fan Assembly
    Custom Bundle No
    Fitment Type Direct Replacement
    Placement on Vehicle Front
    Listing Include 1X Radiator,1X Cooling Fan
    Applicable Regions US
    Type Radiator and Cooling Fan
    Cooling Fan Plug Pin Number 4/4
    Cooling Fan Voltage 12
    Cooling Fan CFM 958
    Cooling Fan Amp Draw 9/9
    Radiator Height(inch) 27.09
    Radiator Width((inch)) 15.75
    Radiator Thickness((inch)) 0.63

    PAYMENT

    Paypal are the accepted forms of payment.

    Please use the eBay checkout system when paying for your order. 

    SHIPPING

    We have two warehouses in US, one is located in CA, and other one is located in GA. We will dispatch packages from the nearest in stock warehouse by recipient's address accordingly. Up to 99% Orders could be shipped within 24 hours after payment completed. 

    ​UPS, FedEx, USPS are available here and we will choose one of them according to the part you order, for generally speaking, the delivery time is about 3 to 8 working days.

    Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available

    Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.

    WARRANTY

    3 YEARS WARRANTY

    RETURN

    All of our brand new items come with a 60-Days money-back guarantee.

    We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement

    We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 

    Man-made damage by abuse or wrong operation is not covered by this warranty.

    Refunds will be credited within 1 to 5 business days of receiving the return. 

    ABOUT US
    1. Any Questions Please Message Us Before Order

    Shop Category
     Store Home
     Radiator
     Condenser
     Radiator Support
     Blower Motor
     Motor Resistor
     Cooling Fan & Kits
     Fan Clutch
     Evaporator Core
     Heater Core
     Thermostat
     Radiator Tank
     Suspension Kits
     Other
    Electric Radiator & Cooling Fan Assembly Kit For 2002 2003 2004 Infiniti I35

    Compatibility Vehicle:

     

    2002-2004 Infiniti I35
    2002-2003 Nissan Maxima

     

    About Cooling Fan:

    -OE design to ensure exact fit, form and function for an easy drop-in installation;

    -ISO 9001 certified manufacturing plants;

    -ABS Plastic with Metal Motor;

    -Built to strict quality control standards;

     

    About Radiator

    The radiator is a main part of the cooling system. Coolant flows through the tubes inside the radiator, which are surrounded by fins that direct airflow. When the vehicle is moving down the road, air flows through these fins and cools the coolant. The lower temperature coolant is then sent back to the engine. A failed radiator can lead to engine overheating and potential engine damage. 

     

    How to Replace the Cooling Fan?

    Step 1 - Locate and disconnect the electrical connector for the cooling fan.


    Step 2 - Remove the lower mounting bolts that attach the fan to the radiator. (Note: Some vehicles have alignment dowels which need not be removed.)


    Step 3 - Remove any weather stripping that will help access the cooling fan. (Note: This is not needed on most vehicles.)


    Step 4 - Loosen mounting bolts or clips to remove any plastic shielding that will inhibit the replacement of the cooling fan.


    Step 5 - Once all mounting bolts have been removed, lift the plastic covering from the vehicle.


    Step 6 - After the plastic covers have been removed, loosen and remove the core support mounting bolts. (Note: This is not needed in some vehicles.)


    Step 7 - Next, lift the core support from the vehicle. (Note: A hood cable release could be mounted to this support.)


    Step 8 - Then, loosen the upper radiator hose clamp using a hose clamp tool or channel locks.


    Step 9 - Once the clamp has been loosened, grasp the hose and twist using a hose pick or screwdriver to assist. Have a fluid catch basin ready as coolant will leak out. (Note: Depressurize or drain the radiator if needed. Radiator replacement.)


    Step 10 - After the upper radiator hose has been removed, undo the mounting clips or bolts that hold the air intake in position. (Note: This step needed only if the air intake is blocking the removal of the cooling fan.)


    Step 11 - Next, loosen and remove the upper mounting bolts from the cooling fan radiator mount.


    Step 12 - Once all mounting bolts and clips have been removed, gently lift the cooling fan from the engine bay. Use caution when performing this action as to not damage the radiator cooling fins.


    Step 13 - After the failed cooling fan has been removed, compare the old fan to the replacement cooling fan. Inspect mounting tabs and electrical connector to ensure proper installation. (Note: Some cooling fan designs feature the replacement motor separate.)


    Step 14 - Gently lower the new cooling fan down into the engine bay and onto the radiator. Again, use caution when performing this as not to damage the radiator cooling fins.) Reassembly all mounting bolts etc., refill cooling system and check the coolant reservoir, add fluid as needed.

     

    Radiator Replace Steps

    1.Raise and support the vehicle, Open the petcock valve or remove the lower radiator hose to drain the coolant from the radiator.


    2.Disconnect the radiator reservoir hose, Remove the upper and lower radiator hose.


    3.Disconnect the cooling fan electrical connector, Remove the cooling fan mounting bolts, Remove the cooling fan. 


    4.Disconnect the transmission cooler lines. Remove the radiator mounting bolts, Remove the condenser mounting bolts, Remove the radiator from the vehicle.


    5.Mount the radiator. Mount the new radiator in position.


    6.Install the condenser mounting bolts and tighten them down, Install the radiator mounting bolts. 


    7.Connect the transmission cooler lines, Mount the fan. Mount the cooling fan in position, Install the cooling fan mounting bolts, Reconnect the cooling fan electrical connector. 


    8.Slide the hose onto the connection. Install the upper and lower radiator hose. Connect the radiator reservoir hose. Close the drain petcock as needed. Then fill the radiator with coolant.


    9.Bleed the air from the cooling system. 

     

    Tools and Supplies Needed:

    1.Socket set

    2.Wrench set
    3.Replacement cooling fan
    4.Fluid catch basin
    5.Protective eyewear and gloves
    6.Hose clamp tool or channel locks

     

    FAQ Anwser

    1.About shipping: We have two warehouses in US, one is located in CA, and other one is located in GA. We will dispatch packages from the nearest in stock warehouse by recipient's address accordingly. Up to 99% Orders could be shipped within 24 hours after payment completed. 

    2.About incompatibility parts received: Please provide us with detailed vehicle information including Year/ Made/Model/Trim and Engine, or VIN#. With these information, we could try to help to find out a correct OE# part or exchange a right one for you if we have it in stock.

    3.About damaged package: Please take some photos of the damage part and send to us, we will inspect it carefully and confirm with engineer if the damage will cause functional or installation issues or not. For serious damage radiator, we could do resend a new one or issue refund as compensation. 

    4.About shipping method: UPS, FedEx, USPS are available here and we will choose one of them according to the part you order, for generally speaking, the delivery time is about 3 to 8 working days.

    5.Why choose us: Professional auto parts seller, Premium Quality Products, Excellent service, Satisfactory shopping experience.

     

    6.Other questions: Please message us before order.

     



    Paypal are the accepted forms of payment.

    Please use the eBay checkout system when paying for your order. 

    We have two warehouses in US, one is located in CA, and other one is located in GA. We will dispatch packages from the nearest in stock warehouse by recipient's address accordingly. Up to 99% Orders could be shipped within 24 hours after payment completed. 

    ​UPS, FedEx, USPS are available here and we will choose one of them according to the part you order, for generally speaking, the delivery time is about 3 to 8 working days.

    Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available

    Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.

    3 YEARS WARRANTY

    All of our brand new items come with a 60-Days money-back guarantee.

    We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement

    We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 

    Man-made damage by abuse or wrong operation is not covered by this warranty.

    Refunds will be credited within 1 to 5 business days of receiving the return. 

    1. Any Questions Please Message Us Before Order

    All rights reserved.