Module parameters
Parameter name;parameter value;Remark
Module model;KW-ACTST
Module type;AC detection
Supply voltage;7~28V
Static power;0.7W;TYP
Protocol;Modbus (RTU mode)
Communication level;485
Baud rate;9600
Maximum detection voltage;410V
Maximum detection current;Various options;5A, 10A, 20A, 50A
Measurement accuracy;±0.5%typ;±1.2%max
Operating temperature;-25~85℃
Module size;80*38;L*W(mm)
Module description
KW-ACTST is an isolated high-precision AC detection module. The module isolates the power supply to be tested and the working power supply through the transformer. It has the functions of AC current, voltage, active power, power factor, and frequency detection. The measurement information can be displayed by a digital tube. , up to 5 digital tubes can be connected in series. Provide 485 communication level, and adopt Modbus (RTU mode) communication protocol. Power-off data automatically saves the setting parameters. It can be widely used in industry, agriculture, scientific research, family and other fields.
Precautions for the use of modules
(1) Please read the wiring instructions carefully and wire in strict accordance with the wiring instructions;
(2) The voltage and current to be detected input by the module are AC and cannot exceed the specified collection range;
(3) The power measured by the module is AC active power, which is related to current, voltage, and power factor, not the product of current and voltage. Please do not use this to verify or doubt the correctness of power measurement;
FAQ
Q: Can the order of the displayed contents of the digital be adjusted?
A: It can be modified and adjusted through instructions.
Q: How many digital tubes can be connected at most, can only one digital tube be connected?
A: Up to 5 digital tubes can be connected in series, and the number of series can be controlled to any number within 5.
Q: Why is the data often lost during communication?
A: First, confirm whether the wiring and power supply voltage are stable, and then confirm whether the baud rate is 9600. The instruction interval is recommended to be controlled above 300ms.