Product Description
For Galanz Original M24FC-610A Magnetron Module Microwave Parts Heating Tube
Material: aluminum + iron
Function:Microwave drying heating accessories
Product Name:Microwave magnetron
Model:M24FC-610A
Installation hole distance:width 35mm length 95mm
Base plate size:width 80mm length 94mm
Product power:1000w
Frequency: 2450MHz
Service life: 4000-4500 hours
Features:
Magnetron M24FC-610A long foot Compatible with most brands of microwave ovens,
as long as the direction of heat dissipation and mounting hole size is the same,
you can replace the magnetron can solve the following symptoms: poor heat
dissipation. Fixed multi-hole installation, convenient and time-saving. Newly
upgraded, stable performance.
Durable The magnetron is made of high quality material, durable and can
withstand high temperatures commonly found in microwave ovens.
Easy Installation The straightforward installation process means you can get
your microwave oven up and running again in no time.
Efficient heating The magnetron plays a vital role in heating food quickly and
evenly for efficient cooking.
Package Include:
1 x cavity magnetron
Note:
Microwave oven does not heat the simple check method: a listen, two see, three
test meter. When listening, first listen to the starting sound. The sound is
much louder than normal, or there is an abnormal hissing sound, which may be a
problem with the magnetron. Secondly, remove the outer cover of the microwave
oven, first cut off the power supply for 1 minute or use sharp-nosed pliers on
the capacitor discharge (high-pressure danger is not repaired, the base is not
repaired), check the magnetron appearance of the magnet is not broken, whether
the heatsink is loose, whether the white plug is burned, whether the microwave
antenna head is burned, whether the copper gasket is burned, whether the
transformer is burned, if it is the old model, check the furnace cavity mica
sheet is burned, the new model pay attention to check the ceramic New model, pay
attention to check the ceramic base plate. Three-meter test, first check whether
the transformer is powered, unplug the bottom two feet of power cord, connect
the microwave oven bulb, or use a multimeter to test the AC voltage. If there is
no power, then you need to check the microswitch, computer board relay and
timer. . Then unplug the magnetron, transformer, diode, capacitor connection
line, with a multimeter (preferably 10K pointer meter) to check the magnetron
white two feet resistance, resistance value should be close to normal 0,
resistance value of infinity that the magnetron is damaged; any one foot of the
shell resistance value should be infinity, resistance value close to 0 that the
magnetron is damaged. Transformer using a multimeter resistance curve to test
whether the three groups of coils are intact. Resistance value of infinity
indicates that the coil is damaged. Capacitor Whether the two pins are
short-circuited, measuring the two pins of the pointer swings slightly to 0 for
normal. If the resistance of the two ends of the shell is very small, it
indicates that the shell is broken. Use the pointer multimeter to measure the
resistance of the high-voltage diode 10K range. The ground terminal of the diode
corresponds to the positive terminal of the multimeter. The resistance is
infinite. Then check the resistance of the high voltage fuse. A resistance of
infinity indicates that the fuse is open. The bidirectional diode, if present,
should also be checked. If they are damaged, they can be removed and used.
Connect a high voltage fuse with case between the high voltage end of the
transformer and the capacitor. If all attachments test good and still do not
heat up, cover one of the power lines at the power fuse with a ring ammeter to
measure the current, if it is less than 5A, then the magnetron is damaged
(magnetron checking is more complicated)