The physical condition is OK, with a few scratches that do not affect the sound quality. In addition, the mechanism and sound are excellent. Remote included in the price! Sending the CD player after receiving cleared payment.
Disc format: CD
Digital converter: MN64733-D, 1 bit MASH
CD Mechanism: CDM-12.1/15
Frequency response: 2Hz to 20kHz
Dynamic range: 100dB
Signal to Noise Ratio: 115dB
Total harmonic distortion: 0.0023%
Line output: 2V
Digital connections: optical
Dimensions: 430 x 114 x 290mm
Weight: 4kg
Accessories: remote control
The D/A converter is equipped with an S-advanced Mash Class A DAC.
This circuit consists of S-Advanced Mash and 3 LSI using two PWM outputs ICs. In the Mash section, fourth order noise-shaping circuit and digital de-emphasis circuit are built into the conventional Advanced Mash.
The 3-chip configuration separates the Mash LSI from the L/R channel PWM ICs to avoid digital noise and improve crosstalk between channels.
In addition, a Class A DAC is adopted for the D/A converter and the PWM output section is changed from conventional C-MOS to bipolar. This reduces the occurrence of through current due to sharp changes in current at the change point of pulse waveform, and suppresses the occurrence of overshoot and undershoot on the PWM waveform. This stabilizes the peak value of pulse and realizes an ideal PWM waveform.
In addition, clock jitter is reduced by placing the crystal oscillator close to the D/A converter.
A virtual battery operation power circuit is installed to prevent noise from the power supply and digital circuit.
During music playback, this circuit uses only the voltage charged in the capacitor as the reference potential and controls the gate of the FET to block noise from the power supply, thereby preventing noise from mixing with the audio signal.
It uses THCB (Technics Hybrid Construction Base) to reduce the adverse effect of vibration. Excellent vibration damping characteristics are obtained by the effective combination of steel plate and viscoelastic body. In addition, vibration from the floor is cut off by 4 insulators.
In addition, the optical deck mechanism is placed in the center of the system to control the vibration of the mechanism.
The electrolytic capacitor uses a mixed bamboo and fiber separator, enabling regeneration with less unwanted incidental sounds.
Digital servo is used in the servo circuit to adjust the amount of servo according to the different conditions of each disk, enabling stable drive and improving sound quality.
The disk tray uses a center mechanism with good weight balance and stability.
Equipped with digital optical terminal.
A gold-plated line output terminal is used.
Equipped with a peak search function.
It is equipped with an auto-queue function that automatically detects the position where the music actually starts and stands by and can start instantly.
Equipped with an A-B repeat that enables repeat performance in any section.
It is the length of the tape to be recorded, and it is equipped with a CD recording editing function capable of editing without sound interruption.
The output level can be adjusted in increments of 2 dB from 0 dB to -12dB.
Equipped with time fade and random play functions.
Equipped with a headphone level volume.
Wireless remote control is included.