Stepper Motor 2 Phase 1.5A 0.9 Degree with 35 Inch Cable for 3D Printer CNC
Size
Rated Current: 1.5 A; Number of Phase: 2; Step Angle: 0.9 degree; Holding Torque: 0.45 Nm Typ.(Two phase on/rated current); Phase Resistance: 2.0 ohm; Phase Inductance: 4.9mH; Rotor Inertia: 87 g.cm²; Shaft Size: 20mm x 5mm/0.78 inch x 0.2 inch(L*D); D-cut Length: 18mm/0.71 inch; Size:42mm x 42mm x 39.3mm/1.65 inch x 1.65 inch x 1.55 inch(L*W*H)
High Torque
Our extruder motor shell is made of steel material and is provided with high torque, low noise, have better high-speed performance.
Low Resistance
The stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor, so effectively reducing the increase in temperature.
Installation
The motor is supplied with a 90cm long power cable with a 4-pin female connector already fitted, ready to plug and work(4-wire: Black: A+, Green: A-, Red: B+, Blue: B-).
Application
The small stepper motor can be used in various areas, such as 3D printers, stage lighting, textile machinery; placement machine, etc.