Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
Supports LBS base station positioning
Onboard USB interface, for testing AT Commands, establishing network connection, and so on
Onboard CP2102 USB to UART converter, for serial debugging
Breakout UART control pins, to connect with host boards like for Arduino/STM32
SIM card slot, supports 1.8V/3V SIM card
TF card slot for storing data like files, messages, etc.
Onboard audio jack and audio decoder for making telephone call
2x LED indicators, easy to monitor the working status
Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baudrate: 9600bps ~ 115200bps
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
FREQUENCY BAND |
|
LTE Cat-4 |
LTE-FDD: B1/B3/B5/B8 |
LTE-TDD: B38/B39/B40/B41 |
|
3G |
UMTS/HSDPA/HSPA+: B1/B8 |
2G |
GSM/GPRS/EDGE: 900/1800 MHz |
SMS AND AUDIO |
|
SMS |
Supported types: MT, MO, CB, Text, PDU |
Storage: USIM card and ME (default) |
|
Audio feature |
Supports echo cancellation |
Supports noise reduction |
|
OTHERS |
|
Power supply |
5V |
Operating voltage |
5V / 3.3V (configured via jumper) |
Operating temperature |
-30°C ~ 80°C |
Storage temperature |
-45°C ~ 90°C |
Dimensions |
56.01mm × 65.00mm |
Compatible With Raspberry Pi Series Boards, Jetson Nano
LTE Cat-4:Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink) *
3G (HSPA+):Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink) *
* stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.
Supports Communication Protocols Including TCP/UDP/FTP/FTPS/HTTP/HTTPS
Making Telephoto Call Or Sending SMS By AT Commands, With Onboard Audio Jack
SIM7600CE-CNSE
CP2102 USB to UART converter
NAU8810 audio decoder
translates 3.3V/5V into 1.8V
MP2128DT power chip
MP1482 power chip
for connecting with Raspberry Pi
for connecting with host boards like for Arduino/STM32
supports 1.8V/3V SIM card
for storing data like files, messages, etc.
for audio actions like making telephoto call
for testing AT Commands, and so on
for serial debugging, or login to Raspberry Pi
MAIN antenna connector
Module power switch
Network status indicator
Power indicator
A: access Raspberry Pi via USB to UART
B: control the SIM7600 by Raspberry Pi
C: control the SIM7600 via USB to UART
PWR - 3V3: auto startup on power-up
PWR - D6: startup/shutdown by the Raspberry Pi D6 pin
NC by default, no flight mode control pin
Flight - D4: flight mode is controlled by the Raspberry Pi D4 pin
VCCIO - 3.3V: set operating voltage as 3.3V
VCCIO - 5V: set operating voltage as 5V
USB connector solder pads
BOOT forced programming solder pads
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
|
SIM7600CE-CNSE |
SIM7600CE-T |
SIM7600E |
SIM7600E-H |
SIM7600A-H |
SIM7600G-H |
|
Applicable regions |
China |
Europe/Southeast Asia/West Asia/Africa/China/South Korea |
North America |
Global |
|||
Band |
|||||||
LTE Cat-4 |
LTE-TDD |
LTE-FDD |
LTE-FDD |
LTE-TDD |
|||
3G |
UMTS/HSDPA/HSPA+ |
UMTS/HSPA+ |
UMTS/HSPA+ |
UMTS/HSDPA/HSPA+ |
|||
2G |
GSM/GPRS/EDGE |
N/A |
GSM/GPRS/EDGE |
||||
GNSS |
N/A |
GPS/Beidou/GLONASS |
|||||
Data Rate |
|||||||
LTE Cat-4 |
150Mbps(DL)/50Mbps(UL) |
N/A |
150Mbps(DL)/50Mbps(UL) |
||||
LTE Cat-1 |
N/A |
10Mbps(DL) |
N/A |
||||
3G (HSPA+) |
42Mbps(DL)/5.76Mbps(UL) |
||||||
2G (EDGE) |
236.8Kbps(DL)/236.8Kbps(UL) |
N/A |
236.8Kbps(DL)/236.8Kbps(UL) |
||||
2G (GPRS) |
85.6Kbps(DL)/85.6Kbps(UL) |
N/A |
85.6Kbps(DL)/85.6Kbps(UL) |
||||
Software Features |
|||||||
Network protocol |
TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS |
||||||
Dial-up protocol |
PPP/NDIS/RNDIS |
||||||
USB driver |
Windows XP/7/8/10, Linux (driver free for Raspbian) |
||||||
Hardware Interfaces |
|||||||
SIM card slot |
Compatible with 1.8V and 3V SIM card |
||||||
UART |
Supports AT commands through UART, compatible with 3.3V/5V operating voltage |
||||||
USB port |
Supports AT commands testing, GPS positioning, firmware upgrading, etc. |
||||||
USB to UART |
Supports serial debugging, or login to Raspberry Pi |
||||||
Audio jack |
Supports audio actions like making telephoto call |
||||||
TF card slot |
Yes, for storing data like files, messages, etc. |
N/A |
Yes |
||||
Antenna connector |
LTE main antenna |
LTE main antenna + LTE diversity antenna + GNSS antenna |
|||||
Applications |
|||||||
Examples |
Healthcare, smart payment, Internet talk, environmental monitoring, energy monitoring, fleet management, smart industry, intelligent agriculture, etc. |