THE COOLING SYSTEM INCLUDES:  2 x 120mm vertical-mount fan units, 1 x USB control module, 1 x 2-way power distribution cable (7' long), 1 x multi-speed power transformer, mounting hardware, and printed installation instructions.   

Note:  In the listing pictures, the cooling systems are shown in two views: 1) To show how it might look when mounted on a TV and 2) against a colored panel, displaying the complete system.   The TV and panel are used for display purposes only, and are not included with the system.

	2 x 120mm vertical-mount TV fan units, with air-chamber bases.
	1 x USB control module.  This controller detects the signal from your TV's USB port. It then directs power from the cooling system's power transformer to the fans.
	1 x 2-way power distribution cable. The Fan units can be separated up to 7 feet apart.
	1 x multi-speed power trans, with a 4-1/2 foot cable. It lets you choose from 6 different speeds for the fans.

 

Features

ABOUT THE USB CONTROLLER:   This cooling system includes a USB control module, which turns the fans on and off, under the control of your TV's USB port (type A connector).   The USB module controls the power from the multi-voltage transformer (included with the cooling system), which runs the fans.

Note:   Your TV only supplies a tiny trickle of power, which activates the USB module.   This protects your TV's circuitry, which is not designed to power a fan.  Instead, the module controls the power from the multi-voltage transformer (included with the cooling system), which runs the fans.

IMPORTANT:  The USB control module will turn the fans on automatically, whenever the USB port is "on" (supplying voltage at the USB socket).  When the USB turns off, the fans stop.   Please check your operation manual, to confirm that the USB port turns on and off with your TV.   A few TVs have a USB port that is always on.  

OTHER FEATURES:

• The cooling system has 2 high-quality, low-noise 120mm fans, with long-lasting and quiet fluid dynamic bearings.   Each fan unit has its own air chamber base, which pulls air out of an area 35% larger than the fan alone.  Note that larger bases (with more area coverage) are available -- please check with me.   The fan units are securely fastened to the back of your TV/Monitor by special adhesive pads, which allow the fan units to be removed and replaced, as needed.
  
• Also includes a multi-speed power transformer, which plugs into any 120 volt outlet.  You control the speed of the fan, using this adjustable transformer.  It can be set to any one of 6 different speeds.
• INTERNATIONAL BUYERS:  The unit's power transformer (supplied with the cooling system), can be switched to either 110/120 volt or 220/240 volt operation.  However, the transformer uses the standard US-style 2-prong plug.  Contact me if you need an adapter plug (there is no charge), and specify one of the three types:  1) NZ/AU  (2 slanted prongs) 2) Euro (2 round prongs), or UK (three large prongs).
  
• Even at medium speeds settings, the fans will replace a volume of air equal to that of most TVs several times per minute (see airflow specs below).
  
• All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
• The standard system comes set up so that hot air enters the front of the fan unit (next to the TV), and exits out the back.  If you need to have the air flow reversed, just let me know.  There is no extra charge for this option.  You can also easily change the fan orientation later, if necessary.
• The system comes completely assembled, with all components installed, wired and ready to go!