Product Description
Note1:
Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.
THESE ONLY FIT THE DT (NEW STYLE). THEY DO NOT WORK ON THE CLASSIC.
Note2:
【No sensor programming Required】 : The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning". Installation of TPMS is recommended to be performed only by trained professionals.
SPECIFICATION :
Battery Life: ABOUT 5YEAR
Operating Frequency: 433 MHz
Part # of sensor you will receive - (68293199AA)
Compatible part #'s - (68293199AB)
PACKAGE CONTENT :
4PCS TPMS SENSOR
COMPREHENSIVE VEHICLE COVERAGE:
MakeBody & TrimEngine & Transmission
2020 Ram 1500 Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Rebel, Tradesman 3.0L V6 - Diesel, 3.6L V6 - Electric/Gas, 5.7L V8 - Electric/Gas, 5.7L V8 - Gas
2019 Ram 1500 Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Rebel, Tradesman 3.6L V6 - Electric/Gas, 5.7L V8 - Electric/Gas, 5.7L V8 - Gas
Notice: PLEASE DOUBLE-CHECK THE PART NUMBERS ON YOUR EXISTING Sensor.
■ Installation Process for reference only :
1. Loose the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.