Description:
100% brand new and high qualit
Feature:
High-quality antenna, strong and stable signal, has a long service life.
RG1.13 cable type, soft and anti-resistant, stable transmission and low power consumption.
IPEX Connector, high gain, 50ohm impedance, 3G 4G dual band antenna.
Designed with the back side sticker, easy and stable to use, not easy to fall off.
It is suitable for wireless minitor WiFi bluetooth module, smart home, light signal transmission device and so on.
Built-in Antenna only, other accessories demo in the picture is not included!
Specifications:
Item Type: Built-in Antenna
Working Frequency: 700-2700MHz
Impedance: 50ohm
Gain: 8DBI
Polarization Mode: omnidirectional
Connector Type: I-Pex
Cable: RG113 cable
Installation Method: PCB back adhesive glue
Material: Plastic+PCB
Note:
No retail package.
Transition: 1cm=10mm=0.39inch
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
A.
Electrical Characteristics
-
2.4GHz Antenna for IEEE802.11b/g/n WLAN System or Bluetooty
-
IEEE 802.11 b/g/n WLAN System
-
Wireless Communication System
-
Wi-Fi / WiMAX / MIMO System
-
Frequency 2400 ~ 2500 MHz
-
S.W.R. <= 2.0
-
Antenna Gain 4.5± 0.7dBi
-
Polarization Linear
-
Impedance 50 Ohm
B.
Material & Mechanical Characteristics
-
Material of Radiator PCB
-
Connector Type Mini Connector
-
Pull Test >= 1.0 Kg
C.
Environmental
-
Operation Temperature - 40 °C ~ + 65 °C
-
Storage Temperature - 40 °C ~ + 80 °C
-
5DBI 40x18mm
Specifications:
Connector: IPEX /Welding
Type:wifi built-in antenna
Frequency: 2400-2500MHZ 4900-5900MHZ
Cable type:RF1.13 cable
Cable length: 12cm
Gain: 5dBi
SWR: <1.5
PCB Size: 80*22mm
Impedance:50 Ohm
Package Included:
IPEX /Welding GSM 2G 3G LTE GPRS CDMA 4G FPC Antenna
5DBI 50x14mm
Type: 2.4Ghz internal antenna
Frequency: 2400-2500Mhz
Gain:5dbi
S.W.R<=2
Impedance: 50 Ohm
FPC size: 45*10*0.1mm
Connector: IPEX
Cable length: 12cm
5DBI 50x14mm
Impedance:50Ω
Antenna Size:50*14mm
Antenna Total length:12cm
Antenna Gain:5dbi
Standing wave ratio:≤2.0
Interface model:IPEX
Polarization :Line polarization
2.4Ghz WIFI Internal Antenna 4dBi IPX IPEX Airgain Omni Antenna
Description:
100% brand new and high quality
Feature:
High-quality antenna, strong and stable signal, has a long service life.
RG1.13 cable type, soft and anti-resistant, stable transmission and low power consumption.
IPEX Connector, high gain, 50ohm impedance, 3G 4G dual band antenna.
Designed with the back side sticker, easy and stable to use, not easy to fall off.
It is suitable for wireless minitor WiFi bluetooth module, smart home, light signal transmission device and so on.
Built-in Antenna only, other accessories demo in the picture is not included!
Specifications:
Item Type: Built-in Antenna
Working Frequency: 700-2700MHz
Impedance: 50ohm
Gain: 5DBI
Polarization Mode: omnidirectional
Connector Type: I-Pex
Cable: RG113 cable
Installation Method: PCB back adhesive glue
Material: Plastic+PCB
Note:
No retail package.
Transition: 1cm=10mm=0.39inch
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
WIFI Internal Antenna
Description:
100% brand new and high quality
Feature:
High-quality antenna, strong and stable signal, has a long service life.
RG1.13 cable type, soft and anti-resistant, stable transmission and low power consumption.
IPEX Connector, high gain, 50ohm impedance, 3G 4G dual band antenna.
Designed with the back side sticker, easy and stable to use, not easy to fall off.
It is suitable for wireless minitor WiFi bluetooth module, smart home, light signal transmission device and so on.
Built-in Antenna only, other accessories demo in the picture is not included!
Specifications:
Item Type: Built-in Antenna
Working Frequency: 780-960MHz, 1710-2700MHz
Impedance: 50ohm
Gain: 5 minus or plus 0.7dBi
Polarization Mode: omnidirectional
Connector Type: I-Pex
Cable: RG113 cable
Installation Method: PCB back adhesive glue
Material: Plastic+PCB
Size: Length: 220mm/8.6in
Color: Green+Black
Note:
No retail package.
Transition: 1cm=10mm=0.39inch
lease allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
On Jan 24, 2024 at 05:57:23 PST, seller added the following information: