Please Note:

This item located in Czech Republic and only shipped to European countries,

If you need to return the item for some reasons, please contact us via eBay message firstly to get the RMA#,and return address instead of sending iit back directly without permission,thank you!

LAUNCH X431 VSP-600 Inspection Camera Videoscope/Borescope with 5.5 mm USB LED Illumination Endoscope

What can you do with LAUNCH X431 VSP-600 Videoscope/Borescope?

VSP600 video scope helps technicians to check issues on unreachable area in a vehicle. With 6 levels light strength, technicians can easily adjust the brightness according to the environment. It will work with LAUNCH X-431 scanners or any Android device and streams live video on it. Technicians can view, record and save images and videos.

How to use your LAUNCH X431 VSP-600 Inspection Camera Videoscope/Borescope?

• If you have an X431 scanner for car in your hand, then you can find other options in the diagnostic software in X431APP, click to enter to find the endoscope option, and use it directly.

• If you have a Windows/Android phone/tablet/computer device.You can download the VSP-600 Videoscope APP for use.

Where can the LAUNCH X431 VSP-600 endoscope help you?

• Vehicle :It is used for quality inspection and assembly inspection of engine, oil pressure parts, nozzle part.

• Electronic equipment:Used to check mechanical action. Parts inspection and research and development areas.

• Water pipe:Used to check the rust and blockage of the drain pipe.

• Home Exploration:Used to check the rust and dirt of steel pipes, internal diagnosis of walls, etc.

• As well as all narrow and dark hard-to-reach areas, you can make it an excellent helper in a 2m deep area.

Press the button with the camera design to press the snapshot (picture，JPED format) of the current view and save it as an image to your Android device or X431V detection tool. This is very useful if you need to record what you see on the inspection camera for later review.

Waterproof LED light is installed in the 2M-long cable tip lens of the endoscope.Adjusting the rotatable dial according to the environment can make it illuminate the deep and narrow dark area like a flashlight.

You can use the neck to enter hard-to-reach places, even if it is not straight, it can still provide you with the image that the camera is looking at.

(Reminder: Although the cable is semi-rigid and can be bent into some strange shapes, please do not use excessive force to avoid damage.)

Waterproof LED light is installed in the 2M-long cable tip lens of the endoscope.Adjusting the rotatable dial according to the environment can make it illuminate the deep and narrow dark area like a flashlight.

Supports use in liquid environments

Remove the protective cap on the upper part of the steel pipe and replace it with a mirror/magnet/hook to help or clean up debris.

• The role of the mirror is to see the problem on the inner wall of the pipe and increase the viewing angle range.

• Hooks can hook out debris.

• Magnel can attract foreign objects.

• Compatible with X-431 scanner 8 inches and above.(X431 V PRO 4.0/X431 PRO3S+/X431 PRO3S+HDIII/431 PAD V,V+ etc.)

• Support Android/Windows system mobile phone, tablet or computer.

Use Tips:

1. It needs to be used with X431 series scanner or Android tablet or computer.

2. The mirror surface is pasted with a blue film, and the blue plastic film needs to be torn off when using it.

3. Use 3 replaceable tools (magnet/mirror/hook), you need to remove the protective cap of the LED light and replace it.

Specifications

Image Type: Live Video/Image Stills

Frame Rate: 30 fps

Image Sensor: 1/12" CMOS

Lens Diameter: 7mm

White Balance: Automatic

Exposure: Automatic

Light Source: 6 Adjustable LEDs

Unit Length: 3.37 ft

Cable Length: 6.56 ft

Cable Length: 30”

Min. Bending Radius: 50mm

Viewable angle: 60℃-65℃

Cable length: 2M

Package List:

1 * LAUNCH VSP-600 Videoscope

1*Type-C USB connector

1*Micro USB connector

1 * HOOK

1 * Mirror

1 * Magnet

1 * User manual