Product Description

Model 8065113 8000mah
Country/Region of Manufacture China
Battery Type Rechargeable
UPC Does not apply
MPN Does not apply
Battery Size 11.3cm * 6.5cm *0.86cm
Brand Unbranded/Generic
Product Type Battery
Amp Hours 8 Ah
Charger Type USB
Chemical Composition LiPo
Voltage 3.7v
 

Send it with a tracking number !

 
 
Description:
 

1. Model : 8065113
 
2. Cell Weight: Approx:  115 g
 
3. Cell Dimension : Thickness(± 0.2)xWidth(± 1)xLength(± 1)(mm) 
                                            8.6 mm ×65mm × 113 mm
                                            0.32 inch  ×  2.56 inch  ×  4.45 inch
 
Internal resistance measured at AC 1KHz after 50% charge
 
4. Nominal Capacity :  8000 mAh @ 0.2C Discharge.
 
5. We will send li battery with a PCM protector board. If your motherboard have a PCM board . please move off this PCM board which on top of new li battery when you install it.
 
6. Fit for Remote controller,IPTV Set top box remote controller,LED lighting,Underwater lighting system,Bluetooth device,MP3/MP4 player,safety lamp,GPS,Mobile phone,E-book,Power bank,Portable DVD, Walkie talkie,Notebook,Tablet PC,PDA,Game player,Pos machine, Consumer electronics device, Medical Devices ,Flash lighting garden lighting,  Toys ,Project Design etc
 
 
Package include :
 
 
Retail package includes: 1 x rechargeable li battery 3.7v 8000mah 8065113 pack 


Electrical characteristics: 
1. Standard Charging method :0.5C (constant current)charge to 4.2V,then CV(constant voltage 4.2V)charge till charge current decline to ≤0.05C 
2. Rated Capacity : The capacity means the discharge capacity of the cell, which is measured with discharge current of 0.2C with 3.0V cut-off voltage after standard charge. 
3. Charging time :Standard Charging:3.0 hours(Ref.) ,Rapid charge: 2.0 hours(Ref.) 
4. Max. charge current :1.0C 
Max. discharge current :1.0C 
Discharge cut-off voltage :3.0V 
5. Operating temperature :Charging: -20℃~60℃ Discharging:-20℃~60℃ 
6. Storage temperature : -10℃~ +45℃ 
7. Cycle life: 400 cycles,Stable performance with 100% in house testing 
8.  Test condition: 
Charge:0.5C to 4.2V 
Discharge:0.2C to 3.0V 
70% or more of 1st cycle capacity at 0.2C discharge of Operation 
Self-discharge :Residual capacity >90% 
After the standard charging, storied the cells under the condition for 30 days, then measured the capacity with 0.2C till 3.0V 
10:Temperature characteristics : 
-20℃: ≥65% 
23℃: 100% 
60℃: ≥96% 
---- According to item at 23±5℃. 
---- Capacity comparison at each temperature, measured with constant discharge current 0.2C with 3.0V cut-off. Percentage as an index of the capacity compared with 100% at 23℃ 
11 : Mechanical characteristics: 
----- Vibration Test : No leakage / No fire 
After standard charging, fixed the cell to vibration table and subjected to vibration cycling that the frequency is to be varied at the rate of 1Hz per minute between 10Hz an 55Hz,the excursion of the vibration is 1.6mm.The cell shall be vibrated for 30 minutes per axis of XYZ axes. 
----- Drop Test : No fire/ no leakage. 
The cell is to be dropped from a height of meter twice onto concrete ground.




DataCaciques