More details from seller

Transit Auto Front Rear Disc Brake Caliper Rotors Drums Semi-Metallic Pads Kit (8Pc) KC8-100839P
COMPATIBILITY

This product only fits the following vehicles :

2011Volkswagen Jetta 2.0L and with GAS engine AND With 280mm Diameter Front Rotor
2012Volkswagen Jetta 2.0L and with Naturally Aspirated and GAS engine AND With 280mm Diameter Front Rotor
Your vehicle is not listed?

Search in our store by entering your vehicle year make model and the position you are searching for in the form below.

PRODUCT DESCRIPTION
­

Included (8 pcs)

  • 1 x Front Left (Driver Side)
  • 1 x Front Right (Passenger Side)
  • 2 x Front Disc Brake Rotor (Both Sides)
  • 1 x Front Semi-Metallic Disc Brake Pad Set (With Sensor)
  • 2 x Rear Brake Drum (Both Sides)
  • 1 x Rear Drum Brake Shoe Set

Kit variants

CMX

  • CMX new calipers are manufactured to exacting OE standards to ensure a perfect performance for the life of the vehicle
  • Made of G3000 Cast Iron to increase caliper strength and provide stress-resistant pressure to the braking pad
  • Premium Zinc Coating provides an unmatched rust and corrosion protection
  • High temperature EPDM rubber dust boots and premium silicone lubricant are used for a smoother operation and an extended product life
  • Premium High-Cast piston provides high-resistance to pressure and increased longevity
  • Part Reference Numbers : 19NB2110 SL19423 19-2110 BC33088 C1923 C33088 1675XA 97-03320A 10-02583-1 FRC11065N FRC11065C FRC11065 CN4003
  • Interchanges: 19NB2110, SL19423, N/A wo BRACKET, 19-2110, BC33088, C1923, C33088, 1675XA, 97-03320A, FRT LH, 10-02583-1, FRC11065N, FRC11065C, FRC11065, CN4003, 19NB2111, SL19422, N/A wo BRACKET, 19-2111, BC33087, C1924, C33087, 1675XB, 97-03320B, FRT RH, 10-02584-1, FRC11066N, FRC11066C, FRC11066, CN4004

Top Quality

  • Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
  • Manufactured with multiple alloys for improved heat dissipation and performance
  • Double disc ground finish eliminates lateral run-out and DTV (disk thickness variation) issues on the rotor and improves pad-rotor bed-in
  • Precision mill balanced to ensure smooth operation with no pedal pulsation
  • Smooth Taper Free Finish provides less pad break-in time
  • Quality validated for proper metallurgy and correct brake plate thickness
  • Rounded radius for added strength
  • Part Reference Numbers : AC43005 AR43005 CR43005 PR43005 34491 34501 YH312974C YH326332C YH312974 YH326332 120.33132 121.33132 BR901074 VW-288 248882957 48882957 748882957 901074 Q34501 980929 980948 AVW1026 BD180523
  • Interchanges: AC43005, AR43005, CR43005, PR43005, 34491, 34501, YH312974C, YH326332C, YH312974, YH326332, 120.33132, 121.33132, BR901074, VW-288, 248882957, 48882957, 748882957, 901074, Q34501, 980929, 980948, AVW1026, BD180523

Positive Plus

  • PPF USA-engineered low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
  • High density friction material to ensure a long pad life and excellent stopping power
  • Premium rubber core multi-layer rubberized shims reduce noise-causing vibration
  • Patented transfer layer extends pad and rotor life
  • Bevelled and chamfered to ensure noise-free braking, maximum pad retention and to prevent edge shifting
  • Scorched for almost no break-in process required and raised initial cold effectiveness
  • Rubberized sensor included
  • Manufactured using a new technology to ensure a friction consistency and improve braking performance
  • Post-cured, high temperature, thermo-processed pads means no break-in required
  • Includes premium hardware kit, ready to be installed right out of the box
  • Manufactured in ISO-Certified Installations and without asbestos
  • Part Reference Numbers : 7635 7860 7709 SG7709M PF7635M AD7709 PF7709M QE7709M SS7635X SS7709M SS7709X UP7635M UP7635X UP7709X D768A 768A
  • Interchanges: 7635, 7860, 7709, SG7709M, PF7635M, AD7709, PF7709M, QE7709M, SS7635X, SS7709M, SS7709X, UP7635M, UP7635X, UP7709X, D768A, 768A

Top Quality

  • Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
  • Manufactured with multiple alloys for improved heat dissipation and performance
  • Double drum ground finish eliminates lateral run-out and DTV (disk thickness variation) issues on the rotor and improves pad-rotor bed-in
  • Precision mill balanced to ensure smooth operation with no pedal pulsation
  • Smooth Taper Free Finish provides less pad break-in time
  • Quality validated for proper metallurgy and correct brake plate thickness
  • Rounded radius for added strength
  • Part Reference Numbers : AD43515 CD43515 PD43515 35151 YH322247C YH322247 122.33020 123.33020 BD920164 VWD-48 4406739 920164 Q35151 97824 BD180427
  • Interchanges: AD43515, CD43515, PD43515, 35151, YH322247C, YH322247, 122.33020, 123.33020, BD920164, VWD-48, 4406739, 920164, Q35151, 97824, BD180427

Top Quality

  • TQ OE-matched friction material gives our brake shoe the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
  • Precision ground maximizes friction-to-drum contact
  • Attached levers & pins included to match OE (on specific applications)
  • Follows original manufacturers' designs for dispersing heat, helping to prolong drum life while reducing noise and vibration
  • Quality validated for proper metallurgy and correct brake shoe thickness
  • Part Reference Numbers : 999 NB999 999B
  • Interchanges: 999, NB999, 999B
FITMENTS

To obtain this guarantee

Make sure that you vehicle is found in the eBay Motor compability list above or in our compatibility summary.

If you wish further validation, simply copy and paste your vehicle information along with your VIN into the order note. We will double-check it before sending your order.

We assume all responsibility for the fitment information of our products.

SAFETY

Additional information

We follow the guidelines set out by Friction Material Standards Institute (FMSI) to ensure the safety of our customers. This means that if the FMSI says a pad number should have no slot or should not be chamfered based on it's size, we will follow their guidelines. Our customer's safety is our highest priority.

All our products follow the OE specifications: there is no modification needed for installation.

SHIPPING

Please note that we do not deliver to:
Alaska, Puerto Rico, Hawaii, Guam, US Virgin Islands, neither P.O. Boxes, APO, FPO

*3 PM Eastern time. Monday - Friday, order received the weekend will be shipped on Monday
FAQ

Do you need any additional information about my vehicle?

If you see your vehicle in the fitment list, you don't need to send us additional information, the parts will fit your vehicle, we guarantee it. If you are not sure and would like to double check, send us a message with your vehicle information or VIN and our vehicle specialists will assist you.

Will I get a tracking number?

Absolutely, all our shipments come with a tracking number that will be uploaded to the order details once it ships.

How to claim Warranty / Exchange / Return?

For any claim, contact us through eBay and one of our customer service agents will be happy to assist you and give you a RMA (Return Merchandise Authorization) number. Everything that is returned to our warehouse needs a RMA code, so make sure to contact us before sending anything back.

The picture does not match my parts..

The picture in our listing are the actual image of the specified application, unless specified to be a generic image.

RETURNS

Defective on arrival & warranty explained

If you happen to receive defective part, or the part does not fit on your vehicle which is listed in eBay Motor compatibility list above or in our compatibility summary, we will send a replacement the same day.

Lifetime warranty on manufacturer defects only

Our exclusive lifetime warranty cover any manufacturer defect that is not caused by normal wear & tear, damage caused by negligence, lack of maintenance, accident, track racing, improper installation or services. Our warranty does not cover zinc plating, rusting, pitting or cosmetic damages.

SUPPORT

Open hours (EST)

Monday8a.m. - 5p.m.
Tuesday8a.m. - 5p.m.
Wednesday8a.m. - 5p.m.
Thursday8a.m. - 5p.m.
Friday8a.m. - 5p.m.
SaturdayClosed
SundayClosed
© 2024 TRANSIT AUTO. ALL RIGHTS RESERVED.