Handheld 2in1 dual channel digital fluorescence oscilloscope signal generator. As an oscilloscope, it has 180MHz-3DB bandwidth and 500MSPS real- sampling rate. Built-in 20MHz DDS function signal generator with 14 kinds of standard function signals, output amplitude fixed at 1VPP, sinewave frequency to 20MHz, other waveform frequency to 10MHz. Built-in 120Mbit storage space, to 250 sets of waveforms and 90 screenshots can be stored, you can view full-screen imagings and secondary analysis of the stored waveform data. Connect to computers via USB cable, you can directly view or copy the saved BMP imaging file inside the oscilloscope.
Features:
【2in1 Design with Reliable Quality】: Handheld 2in1 dual channel digital fluorescence oscilloscope signal generator. As an oscilloscope, it has 180MHz-3DB bandwidth and 500MSPS real- sampling rate. Built-in 20MHz DDS function signal generator with 14 kinds of standard function signals, output amplitude fixed at 1VPP, sinewave frequency to 20MHz, other waveform frequency to 10MHz.
【Digital Fluorescence Display Technology】: 2.8-inch IPS display with clear definition, color display and multi-level grayscale display capability; waveform changes can be clearly seen in minute.
【50,000wfms/s Waveform Refresh Rate】: Better capture the signal so that there is nowhere for abnormal waveforms to hide.
【Accurate Real- Trigger System】: With complete trigger function, automatic, , regular three trigger modes; rising- trigger mode, falling- trigger mode.
【Adaptive Adjustable Trigger Suppression】: Adapts high-frequency, low-frequency, and high-noise signals for cleaning stable waveforms.
【Large Base Scrolling Mode】: In scroll mode, slow level changes can be monitored in real .
【ZOOM Scaling Base】: Provide an additional amplification base. It can provide 2~1000 times amplification view effect in running or pause state.
【Digital Fluorescence Mode】: Support digital fluorescence technology, dual-channel generate a closed curve graph can be used to compare the amplitude, frequency, phase of two groups of signals.
【5mV High Sensitivity Ultra-high Waveform Signal-to-Noise Ratio】: The front-end uses outstanding shielding measures and a stable feedback system; all parts with sources of interference are located away from the front-end.
【20M Hardware Bandwidth Limit】: The front end has a built-in switchable 20MHz hardware bandwidth limiting component, and the -3DB attenuation bandwidth is 20MHz when turned on.
【Special Truncated Output Function】: Intercept part or all of various signals measured by oscilloscope to be used as output signal of signal generator, to 500 custom signals can be stored.
【400V High-voltage Burn-in Protections】: The front-end input stage is designed with high-voltage resistance, and the overall design can achieve 400V burn-in resistance in any gear.
【Built-in Rechargeable 】: Built-in 3000mah high-capacity rechargeable , to 4 hours of , can be set from 5 minutes to 2 hours of timeout , support 5V2A quick .
【-Button Auto Adjustment】: Manual cursor measurement, equipped with efficient - auto adjustment function, signal measurement is easy and ; cursor accurate measurement of waveform parameters.
【FFT Simple Spectrum Display】: Qualitative overview of the current signal spectrum .
【Waveform Saving Screenshot Saving】: Built-in 120Mbit storage space, to 250 sets of waveforms and 90 screenshots can be stored, you can view full-screen imagings and secondary analysis of the stored waveform data.
Specifications:
Name: 2in1 Oscilloscope Signal Generator
Material: plastics
Language: English, Russian, Portuguese, Chinese adjustable
: 1 * built-in 3000mAh (icluded)
Number of channels: 2
bandwidth: 180MHz
Maximum sampling rate: 500MSPS
Input coupling: /AC
Rise : 2.5nS
Storage depth: 120Kpts
Input impedance: 1MQ-18PF
Vertical sensitivity: 5mV~10V(1X)
base : 5nS~50S
DCAccuracy: ±2%
accuracy: +0.01%
Trigger architecture: digital trigger
Trigger mode: auto//regular
Trigger edges: rising/falling
Test : 40mV~80V(1X)
Screen storage: 90 sheets
Interceptwave signal: 500
Interceptwave outputter: Support
20M hardware bandwidth limit: support
Cursor measurement: frequency/period/amplitude
ZOOM scaling base: support
Digital fluorescence technology: Support
Adjustable Automatic Bandwidth Limiting: Support
Color display technology: Support
Scrolling mode: support
X-Y mode: Support
Auto-adjustment: Support
Waveform manager: support
High voltage -burning: all gears withstand voltage 400V
Screen size: 2.8 inch
Screen resolution: 320 * 240
Screen display process: IPS full view
Expansion interface: USB transmission interface
Auto shutdown: 5 minutes to 2 hours
Firmware upgrade: support iso imaging upgrade
requirements: 5V-2A
capacity: 3000mah
Parameter measurement: 12 kinds
Signal generator: 14 kinds of standard function signal
Waveform storage: 250 groups
Item size: 135 * 90 * 40mm / 5.31 * 3.54 * 1.57in
Package size: 245 * 147 * 80mm / 9.65 * 5.79 * 3.15in
Package weight: 680g / 1.50lb
Packing List:
1 * 2in1 Oscilloscope Signal Generator
2 * 200m Probe
1 * USB Cable
1 * Guideline
Features:
【2in1 Design with Reliable Quality】: Handheld 2in1 dual channel digital fluorescence oscilloscope signal generator. As an oscilloscope, it has 180MHz-3DB bandwidth and 500MSPS real- sampling rate. Built-in 20MHz DDS function signal generator with 14 kinds of standard function signals, output amplitude fixed at 1VPP, sinewave frequency to 20MHz, other waveform frequency to 10MHz.
【Digital Fluorescence Display Technology】: 2.8-inch IPS display with clear definition, color display and multi-level grayscale display capability; waveform changes can be clearly seen in minute.
【50,000wfms/s Waveform Refresh Rate】: Better capture the signal so that there is nowhere for abnormal waveforms to hide.
【Accurate Real- Trigger System】: With complete trigger function, automatic, , regular three trigger modes; rising- trigger mode, falling- trigger mode.
【Adaptive Adjustable Trigger Suppression】: Adapts high-frequency, low-frequency, and high-noise signals for cleaning stable waveforms.
【Large Base Scrolling Mode】: In scroll mode, slow level changes can be monitored in real .
【ZOOM Scaling Base】: Provide an additional amplification base. It can provide 2~1000 times amplification view effect in running or pause state.
【Digital Fluorescence Mode】: Support digital fluorescence technology, dual-channel generate a closed curve graph can be used to compare the amplitude, frequency, phase of two groups of signals.
【5mV High Sensitivity Ultra-high Waveform Signal-to-Noise Ratio】: The front-end uses outstanding shielding measures and a stable feedback system; all parts with sources of interference are located away from the front-end.
【20M Hardware Bandwidth Limit】: The front end has a built-in switchable 20MHz hardware bandwidth limiting component, and the -3DB attenuation bandwidth is 20MHz when turned on.
【Special Truncated Output Function】: Intercept part or all of various signals measured by oscilloscope to be used as output signal of signal generator, to 500 custom signals can be stored.
【400V High-voltage Burn-in Protections】: The front-end input stage is designed with high-voltage resistance, and the overall design can achieve 400V burn-in resistance in any gear.
【Built-in Rechargeable 】: Built-in 3000mah high-capacity rechargeable , to 4 hours of , can be set from 5 minutes to 2 hours of timeout , support 5V2A quick .
【-Button Auto Adjustment】: Manual cursor measurement, equipped with efficient - auto adjustment function, signal measurement is easy and ; cursor accurate measurement of waveform parameters.
【FFT Simple Spectrum Display】: Qualitative overview of the current signal spectrum .
【Waveform Saving Screenshot Saving】: Built-in 120Mbit storage space, to 250 sets of waveforms and 90 screenshots can be stored, you can view full-screen imagings and secondary analysis of the stored waveform data.
Specifications:
Name: 2in1 Oscilloscope Signal Generator
Material: plastics
Language: English, Russian, Portuguese, Chinese adjustable
: 1 * built-in 3000mAh (icluded)
Number of channels: 2
bandwidth: 180MHz
Maximum sampling rate: 500MSPS
Input coupling: /AC
Rise : 2.5nS
Storage depth: 120Kpts
Input impedance: 1MQ-18PF
Vertical sensitivity: 5mV~10V(1X)
base : 5nS~50S
DCAccuracy: ±2%
accuracy: +0.01%
Trigger architecture: digital trigger
Trigger mode: auto//regular
Trigger edges: rising/falling
Test : 40mV~80V(1X)
Screen storage: 90 sheets
Interceptwave signal: 500
Interceptwave outputter: Support
20M hardware bandwidth limit: support
Cursor measurement: frequency/period/amplitude
ZOOM scaling base: support
Digital fluorescence technology: Support
Adjustable Automatic Bandwidth Limiting: Support
Color display technology: Support
Scrolling mode: support
X-Y mode: Support
Auto-adjustment: Support
Waveform manager: support
High voltage -burning: all gears withstand voltage 400V
Screen size: 2.8 inch
Screen resolution: 320 * 240
Screen display process: IPS full view
Expansion interface: USB transmission interface
Auto shutdown: 5 minutes to 2 hours
Firmware upgrade: support iso imaging upgrade
requirements: 5V-2A
capacity: 3000mah
Parameter measurement: 12 kinds
Signal generator: 14 kinds of standard function signal
Waveform storage: 250 groups
Item size: 135 * 90 * 40mm / 5.31 * 3.54 * 1.57in
Package size: 245 * 147 * 80mm / 9.65 * 5.79 * 3.15in
Package weight: 680g / 1.50lb
Packing List:
1 * 2in1 Oscilloscope Signal Generator
2 * 200m Probe
1 * USB Cable
1 * Guideline