KINGBOLEN, as a new company rising in automotive aftermarket who is dedicated to focus on product development & innovation, attaches due importance to user experience with a group of distinguished experts and engineers who ensure every product is well-designed and user-oriented.
KINGBOLEN YA001 as CR319 CR3001, featuring codes reading/clearing, the check engine light turning off, I/M readiness status checking, freeze frame data viewing and vehicle identification number retrieving, is truly the ultimate must-have OBD2 code reader in efficiency and affordability for beginners looking for a fast and accurate solution to partial of engine and AT systems.
[Key Reasons To Buy YA001]
Lifetime Free Update (Note: UPDATE IS NOT NECESSARY before utilization. The YA001 comes with 31.5 inch cable)
YA001 provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4,
SAEJ1850, and ISO15765-4.
YA001 is better than CR3001 and CR319.YA001 provides a permanent free upgrade service that can be quickly
upgraded and free of drivers. YA001's mode 6 function is precise and perfect, not only can check the fault code, but also
can find the cause caused by the fault code, and can carry out battery test.YA001 is your best choice.
YA001 Bullet Points:
Faster and in-depth scan the engine modules, it helps to find out the hiddened issue of the engine light.Focus on the
important modes like read and clear codes, mode6 and mode8, you can easily to know the on-board monitor system
and the evap system.You can also see the status of the misfire cylinder.
1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
3.Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and
5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time
7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from
8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9.Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and
10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
Lifetime Free Update
No need to install drivers.Download the application of the YA001 on PC and copy it to the YA001 via the USB cable.
Review Back functions
Help you record and play back a readout or graph. This is useful if you have an intermittent problem that doesn’t generate
Quick Operations and Diagnosis
YA001 OBDII scanner has a fast and intuitive operation through an easy-to-use and quick diagnostic response than comparable
Support Car Models for OBDII diagnostic function:
(Note: YA001 only Support 12V cars, Does not support 24V Truck )
YA001 Support all legislated OBD2 protocols car :
1.SAE J1850 PWM(41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)
American Car :
For Chrysler , for Ford, for GM, For Jeep ...Need Standard OBD2 Protocols from 1996 to now
European Car :
For Alfa romeo , for SAAB ,for Acura , for Opel , for Audi for Seat , for Peugeot , for Renault , For Bentley , for Skoda ,
Japanese/Korean Car:
For KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai , for Dacia , for Lexus , for Mazda, for Nissan, for Subaru ,
Chinese Car:
Need Standard OBD2 Protocols from 2008 to now
Specifications:
Screen: 1.8" TFT Screen
Voltage: 12V
Operating Temperature: 0℃~ 50℃(32℉-122℉)
Environment Temperature: -20℃~70℃(-4℉-158℉)
Dimension: 4.8''*2.6''*0.8''
Weight: <220g
Packing List:
1pc * YA001 Code Reader
1pc * English User Manual
YA001 is similar with YA-101,,different disign,more cost-effective!!!
Kingboleng YA-101 as follow,you could select it as you like:
Locating Data Link Connector
1.Choose a location under driver side dash under steering wheel) and use that description in both places.
2.If unsure about location of dlc, check vehicle manual or reputable service center about location
Connect the tool
1.If the connector is not there a label should be there indicating the whereabouts of the connector.
2.If necessary, remove the cover from the DTC
3.Turn the ignition switch to the on position.Do not start the engine
4.Plug the OBD connector into the Data Link Connector.
5.The tool will attempt to identify the vehicle. If successful, the vehicle identified. if the vehicle cannot be identified, menus will be shown for you to select the vehicle manually.
We accept PayPal payment. Please contact us if you need to use another method to pay.
Payment should be made within 7 days after bidding ends. Otherwise an Unpaid Item case will be opened to you.
We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Items will be shipped within 1-2 business day when we received payment.
Delivery time depends on destination.
All of the shipping will have the tracking number and we will inform you the delivery information once the product is sent out.
We are authorize distributor, our all items are 100% original and Our devices have warranty:
12 Months free repair for the devices.
3 Months for the accessories.
Please contact us firstly when you need warranty service.
In case an item arrives faulty, please contact us in 30 days and keep it unused.
We will instruct you on how to return and get refund or replacement.
If after 30 days, or the item has been used, we have the right to decline your claim
We are specialized dealer of On-Board Diagnostic tools and automotive electronics
for more than 10 years.
We are authorized first class distributor of LAUNCH,THINKCAR, EDIAG and KINGBOLEN etc., and more brands will be show in our store in near future.
We have warehouse in US,UK,Hong Kong and China to ensure fast shipment and after-sale service.
We have more than 100 employees devoting to customer satisfaction.
Terms of tax:
We are not responsible for buyer's local taxes, please consult your local Customs for tax details.
Working Time: 9:00 am to 18:00 pm (GTM +8:00) from Monday to Friday
If for some reason there is any issue with the purchase, please contact us before leaving feedback, and we will be glad to work with you to have it resolved.