A real powerhouse module that takes up only 12 HP of rack space. It can generate random and pseudo random control voltages, staircase waveforms, deliberate aliasing of audio signals, portamento type effects, adjustable audio range noise and has many other uses too

It can be switched between Sample & Hold or Track & Hold modes, and the unique “Restrict” control affects the way the hold output changes with respect to the current input level and previously held output level. With the control fully off the unit behaves just like any other S/H, but at fully clockwise the output is restricted to move by only a small amount after each new sample. The output will still have the same range as the input, but will need more hold commands to get there. This versatile Sample and Hold circuit was designed by Tony Allgood, and is built under licence from Oakley Sound

The Sample Hold & Slew module also includes a very well featured Slew generator, which includes a Gated Slew function. It can be used independently or chained with the S&H module. Slew mode can be switched between Linear or Exponential Slew types. There is a Gate input, so that the Slew on/off can be switched using an External CV (Gated Slew), and also the Slew control logic can be reversed by a toggle switch that doubles as a manual Slew on / off switch . In addition, it has slew up only, slew down only or slew up and down modes, which are selected with a three-way toggle switch. An indicator LED lights when Slew is active.

There is also an inbuilt analogue Noise generator, which is normalised to the input of the Sample and Hold section, and there are both regular and clipped Noise outputs – the Clipped Noise is particularly useful with the sample and hold section, as it is weighted to produce higher random voltages. Both Noise outputs are fed through an internal “Noise Colour” control – at centre position it allows the noise through unfiltered, turning the control anti-clockwise introduces low pass filtering of the Noise, and rotating it clockwise introduces high pass filtering. The Noise source itself is based on an analoguebandgap shunt regulator configured in avalanche mode, and it generates white noise with a gradual roll off above 8kHz. It is a little “grainier” in character than the noise from our MiniMod Glide & Noise module (which uses a reverse biased transistor as a noise source), so is a useful compliment to this module as it does not generate exactly the same sounding Noise.

Lastly, it includes a wide range clock generator with a rate LED. The range is from one cycle every thirty seconds to around 2 kHz and the clock output is normalised to the Clock Input of the S&H section. It also has a Clock Out jack so that it can be externally patched to other Eurorack modules.

New Gear

We are authorized dealers for a number of great companies that back their products with standard warranties.

We extend this warranty period for 1 year beyond the manufacturer's as a token of our gratitude for shopping with us  :)

We want to make sure that you don't get stuck with a lemon and will either replace or have the unit repaired by an authorized service center on our dime.

We offer a 30 day return policy 'no questions asked'.

Unless the item is defective, you will be subject to a 15% restocking fee. 

Used Gear

All gear is tested prior to listing for sale. Any known issues will be mentioned in the item description.

We work extremely hard to make sure that you have peace of mind when buying pre-owned gear. 

You will have 14 days from receipt of the item to test and make sure that everything meets your expectations. 

If the item is found to be defective, we will cover return shipping. You must contact us first to set up the RMA. 

Any used items returned for reasons other than functionality (within this 14 days) will be subject to a 20% restocking fee. 

We will bend over backwards to make sure that you are happy with your purchase.

If you have any issues or questions at all please email or call us.  We are happy to assist!

Orders will be processed and handled within 1 business day in most cases.

Orders placed before 1pm PST during our business hours generally are shipped the same day.

We also offer expedited shipping. If you have any special requests please contact us first, and we will do our best to accommodate you.

Domestic Buyers

• We offer Free shipping on every item big or small to the lower 48 US States
• Hawaii, Alaska & Puerto Rico residents are subject to a handling fee, so please contact for quotes.
• We ship to APO & FPO addresses, but please contact for a quote. 
• We insure every package for the full amount 
• Any purchase over $200 will require a signature. THERE ARE NO EXCEPTIONS! 

International Buyers

• We ship via FedEx or USPS to most countries around the world
• Buyer is 100% responsible for ALL Duties & Taxes (VAT,etc.) imposed by your local government/ customs officials. 
• These are not included in our Shipping & Handling fees so please be aware before purchasing.
• International orders are usually delivered in 3-5 business days if there are no delays caused by customs or weather conditions.

Return Policy

• You must contact us for a RMA (Return Merchandise Authorization) within 30 days for new gear and 14 days for used gear.
• Items are subject to either a 15% (new gear) or 20% (used gear) restocking fee, unless found to be defective. 
• Customer is required to cover shipping using a trackable service with signature confirmation.
• We will cover return shipping for defective items and submit a return label via email.
• All new items must return in 'new' condition with all original packaging, warranty cards, and cables. 
• All used items must be returned in the same condition as picture & represented online.
• If new items arrive damaged and/or without original materials the RMA may be revoked or you may be subject to a 25% restocking fee. 
• If used items arrive damaged the RMA may be revoked or you may be subject to a 30% restocking fee. 
• Please allow up to 5 business days for us to process returns. Refunds, store credit or replacements will be handled within that time frame

If you experience a problem with a unit: do not attempt to open or repair the unit yourself. 

Any attempt to do so will void any warranty or guarantee. 

Please send us a detailed description of the problem you are experiencing and we will have a team member contact you as soon as possible.

International Buyers

We are not responsible for unit damaged due to use of improper voltage. 

Please make sure to double check voltage compatibility and use a proper voltage converter when necessary.

Our customer service hours are Monday through Friday, 10AM to 7PM Pacific Time.

Feel free to contact us

We are here to help, so if you don't get ahold of us leave a message and we'll be back with you as soon as possible.

Thanks!