Specification:
Series | HY inverters | |
Control Mode | SPWM | |
Input Power | 220V class:220±15%, 1 Phase or 3 Phase | |
5-Digits Display & Status Indicator Lamp | Displaying frequency, current, revolution, voltage, counter, temperature, FOR or REV rotation, and fault, etc. | |
Communication Control | RS-485 | |
Working Temperature | -10~40℃ | |
Humidity | 0-95% Relative Humidity(without dew) | |
Vibration | Below 0.5G | |
Frequency Control | Range | 0.1~400.0Hz |
Accuracy | Digital: 0.1%(-10~40℃); Analog: 0.1% (25±10℃) | |
Setting Resolution | Digital: 0.1Hz; Analog: 1‰ of max. Operating frequency | |
Output Resolution | 0.1Hz | |
Operator Setting Method | Press directly ← ∧ ∨ to set. | |
Analog Setting Method | External Voltage 0-5V,0-10V,4-20mA,0-20mA. | |
Other Functions | Frequency lower limit, starting frequency, stopping frequency, three skip frequencies can be respectively set. | |
General Control | Ramp Control | Selectable 4-speed steps ramp-up and -down time (0.1-6500s). |
V/F Curve | Set V/F curve at will. | |
Torque Control | Torque increase settable by max. 10.0%. The starting torque can reach 150% at 1.0Hz. | |
Multi-Inputs | 6 multi-function input terminals for 8–speed steps control, program operation, switching of 4-speed Ramp, UP/DOWN function, counter, external emergency stop and other functions. | |
Multi-Outputs | 5 multi-output for displaying of running, zero speed, counter, external abnormity, program operation and other information and warnings. | |
Other Functions | Auto Voltage Regulation(AVR), Decelerating Stop or Coasting Stop, DC Braking, Auto Reset and Restart, Frequency Track, PLC Program Control, Traverse Control, Drawing Control、Auto Energy Saving, Carrier Adjustable (Up to 20KHz), etc. | |
Protection Functions | Overload Protection | Electronic relay protection motor drive Drive(for constant torque 150%/1 min. for the kinds of fan 120%/1min.) |
FuseProtection | When the fuse breaks , the motor will stop. | |
Over-voltage | 220V class:DC Voltage >400V
| |
Under-voltage | 220V class:DC Voltage <200V
| |
Restart After Instant Stop | Restart with Frequency Track after Instant Stop | |
Stall Protection | Stall protection in ramp operation | |
Output Short Circuit | Electrical circuit protection | |
Other Functions | Fin over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, etc. |
1pcs X 2.2KW 220V 3HP Frequenzumrichter
Note:
Do not connect 220V power directly, this will burn the motor
The motor must work with Frequency Drive Inverter VFD
Spindle [4 Bearings]Specification:
Specification: Φ80mm x Length:214mm
Power: 2.2 KW
Voltage: 220V
Frequency: 400 Hz
Speed: 0-24000 R/min
Water Cooling
ER20 ( 4mm,6mm,8mm,12mm,12.7mm) collet chuck by your choice
Runout off: less than 0.005mm
Grease Lubrication
Full 13pcs(13 size ) ER20 PRECISION SPRING COLLET
(Gripping Range 1.0mm-13mm)For CNC milling lathe tool
High precision and Durable
Gripping Range 1MM to 13MM (6/128" to 33/64")
Run-Out Tolerance 0.015MM (0.0006")
First Class 1065 Carbon Steel
Hardened & Precision Ground
water-pump:
Product parameters:
Head: Max 3.2M ;
Power: 75W ;
Flow: 3000 L/H ;
Voltage: 220V ~ 240V;
Dimensions: L 150mm *W 80mm * H 140mm;
Tap outside diameter: 6mm
Package Content:
1 * CNC High Speed 2.2KW Spindle motor
1 * 13pcs(13 size ) ER20 PRECISION SPRING COLLET
1 * water-pump
1 * water pipes