PH-110 pH/ORP meter sensor electrode for exhaust gas detection, acid and alkali
Option 1: Host + 5m plastic case electrode
Option 2: Host + 5m plastic case temperature compensation electrode
Option 3: Host + 5m tetrafluoro acid and alkali resistant electrode
Option 4: Host + 5m tetrafluoro acid and alkali resistant temperature compensation electrode
Option 5: Host + 5m glass electrode
Option 6: Host + 5m glass temperature compensation electrode
Option 7: Host + 5m ORP electrode
Option 8: 5PCS 5m Plastic Case Electrode
Option 9: 5PCS 5m plastic case temperature compensation electrode
Option 10: 5m tetrafluoro acid and alkali resistant electrode
Option 11: 5m tetrafluoro acid and alkali resistant temperature compensation PH electrode
Option 12: 5m glass electrode
Option 13: 5m glass temperature compensation electrode
Option 14: 5m Plastic Case ORP Electrode
Option 15: Host meter (without electrodes)
Option 16: Host + 5m desulfurization electrode
Option 17: Host + 5m desulfurization electrode with temperature compensation

New PH-110 Digital pH/ORP Meter Sensor Electrode pH for Discharge Detection, Dosing, Acid-Base Ratio

For RS-485 communication, we only provide the interface and do not provide technical support!

Online PH/ORP Meter Parameters
Measuring range: 0-14ph, -1900~+1900mv
Accuracy: ±0.02ph, ±1mv
Resolution: 0.01ph, 1mv
Stability: ≤0.02ph/24 hours, 3mv/2]
Temperature Compensation: 0-100C Manual/Auto (NTC-10)
Communication function: RS485 communication interface (optional)
Transmission output: isolated transmission 4-20ma output
function: two-way relay AC250V, 3A
Product size: 96*96*100mm
Hole size: 92*92mm

Electrode selection
Plastic case electrode: ordinary sewage water plant 0-60 ℃
Glass electrode: Waterworks 0-80℃
PTFE electrode: strong acid and alkali, lime water, etc. 0-80℃

Measurement parameters: PH electrode, ORP electrode optional
(The electrode with temperature compensation function can be specified)
Lead length: 5/10/15/20/25/30/35 meters optional
Link method: low noise cable leads directly
Withstand voltage: 0.6MP
Installation size: upper and lower 3/4NPT pipe thread
Material: ABS plastic + glass

Measurement parameters: PH glass electrode
(The electrode with temperature compensation function can be specified)
Lead length: 5m/10m/15m optional
Link method: low noise cable leads directly
Withstand voltage: 0.6MP
Installation size: PG13.5
Material: ABS plastic shell + glass

Tips:
It is recommended to clean the electrode after using it for about half a month, and soak it in electrode soaking solution for 2-3 hours before calibration.
This saves the electrode more sensitive and durable.

①, PH composite electrode
It is suitable for the detection of PH value of conventional water and sewage
②, ORP electrode
ORP value detection for most water quality
③, PH flat electrode
It is suitable for the detection of PH value of lime water desulfurization
④, PH tetrafluoro electrode
Suitable for corrosive occasions with strong acid and alkali
⑤, PH glass electrode
It is suitable for the measurement of high temperature and clean water.

Packing:1PCS