TESTING & COSMETIC NOTES:
https://www.ocdepot.com/template/spacer.gif
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
The unit has been reset to the factory default settings. See console log below.

COMPONENTS INCLUDED IN THIS AUCTION:
https://www.ocdepot.com/template/spacer.gif
• (1) - CISCO SG350X-24-K9 V01 24-PORT GIGABIT STACKABLE MANAGED NETWORK SWITCH
• (1) - POWER CORD


REPLACEMENT or MONEY BACK GUARANTEE:
https://www.ocdepot.com/template/spacer.gif
When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.

ADDITIONAL INFORMATION:
https://www.ocdepot.com/template/spacer.gif
The following is the Console Log from this item:
BootROM 1.41
Booting from NAND flash
MTL, DNI MPP 13 output high..


General initialization - Version: 1.0.0
Serdes initialization - Version: 1.0.2
DDR3 Training Sequence - Ver TIP-1.22.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
BootROM: Image checksum verification PASSED


ROS Booton: Jul 26 2015 14:46:31

Press x to choose XMODEM...
Booting from NAND flash

Running UBOOT...


U-Boot 2013.01 (Nov 26 2019 - 13:28:49) Marvell version: 2014_T3.0_eng_dropv6 2.
5.18

Loading system/images/active-image ...
secure boot not supported
Uncompressing Linux... done, booting the kernel.
I2C frequency 100 kHz (Tclk 200 MHz, freq_m 12, freq_n 3)


MAC address : 40:a6:e8:e6:ff:93.

Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.

*******************************************************************
*** Running SW Ver. 2.5.0.92 Date Nov 26 2019 Time 13:25:31 ***
*******************************************************************

HW version is V01
Serial Number is DNI200307Y9
Base Mac address is: 40:a6:e8:e6:ff:93
Dram size is : 512M bytes
Flash size is: 256M
26-Nov-2019 01:27:19 %CDB-I-LOADCONFIG: Loading running configuration.
26-Nov-2019 01:27:19 %CDB-I-LOADCONFIG: Loading startup configuration.
Device configuration:
Slot 1 - SG350X-24
Device 0: CPSS_98DX3236 (AlleyCat3)
CPLD version is: 0x01
CPU speed: 800 MHz

------------------------------------
-- Unit Factory Default --
------------------------------------

26-Nov-2019 01:27:23 %Entity-I-SEND-ENT-CONF-CHANGE-TRAP: entity configuration c
hange trap.
26-Nov-2019 01:27:52 %INIT-I-InitCompleted: Initialization task is completed


>
-----------------------------------
-- Unit Number 1 Master Enabled --
-----------------------------------

26-Nov-2019 01:28:01 %Environment-W-RPS-STAT-MSG: Power supply source changed to
Main Power Supply.
26-Nov-2019 01:28:01 %Entity-I-SEND-ENT-CONF-CHANGE-TRAP: entity configuration c
hange trap.
26-Nov-2019 01:28:01 %MLDP-I-MASTER: Switching to the Master Mode.
26-Nov-2019 01:28:02 %SNMP-I-CDBITEMSNUM: Number of running configuration items
loaded: 0

26-Nov-2019 01:28:02 %SNMP-I-CDBITEMSNUM: Number of startup configuration items
loaded: 0
The SSH Server is generating a default RSA key.
This may take a few minutes, depending on the key size.
26-Nov-2019 01:28:06 %Environment-I-FAN-STAT-CHNG: FAN# 1 status changed to oper
ational.
The SSH Server is generating a default DSA key.
This may take a few minutes, depending on the key size.
The SSH Client is generating a default RSA key.
This may take a few minutes, depending on the key size.
The SSH Client is generating a default DSA key.
This may take a few minutes, depending on the key size.
26-Nov-2019 01:28:31 %SSL-I-SSLCTASK: Starting autogeneration of self-signed cer
tificate - 2048 bits

Generating RSA private key, 2048 bit long modulus
26-Nov-2019 01:28:34 %SSL-I-SSLCTASK: Autogeneration of self-signed certificate
was successfully completed

Generating RSA private key, 2048 bit long modulus
26-Nov-2019 01:28:52 %SYSLOG-N-LOGGING: Logging started.

>lcli

Console baud-rate auto detection is enabled, press Enter twice to complete the d
etection process



User Name:
Detected speed: 115200


User Name:cisco
Password:*****

Please change your username AND password from the default settings.
Change of credentials is required for better protection of your network.
Please note that new password must follow password complexity rules.
Enter new username:
 
SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes>
SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes> SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes> SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes>
SearchBy36 - 259136 | Loc: Z30 | L: Rob | T: Rob | PM: Nick  | QTY: 0 | Plan: S1- Q4 5 pounds or more | 20.00"x13.00"x5.00" 12.00lbs | Start: $0.00 | BIN: $149.99 |  | 2024-03-15 |  | Computers/Tablets & Networking::Enterprise Networking, Servers::Switches & Hubs::Network Switches