This is the Futaba 3PV 3-Channel Radio System with the 3-Channel R203GF Receiver.

FEATURES:
FHSS/T-FHSS, S-FHSS protocols Large, easy to read programming screen Four wheel steering and brake mixing Model data copy Anti-lock brake system (ABS) function R203GF 3-channel receiver is ideal for brushless ESCs and digital servos DT3 selection SW1 Throttle fail safe Steering and throttle trim Channel 4 trim Sub trim Steering dual rate adjustment Steering and throttle end point adjustment Channel 3 and 4 end point adjustment, and servo reversing Steering and throttle exponential Auto power off after ten minutes One year limited warranty through Hobby Services beginning at date of purchase

YOU WILL RECEIVE:
Futaba 3PV 3-Channel Transmitter, 3-Channel R203GF Receiver, Instruction Manual

REQUIREMENTS:
AA Batteries: Four for transmitter (may also be powered by the Futaba HT5F1800B 6V NiMh pack FUTM1482, or the Hobbico LiFe 6.6V 1900mAh pack, HCAM6521

SPECIFICATIONS:
Transmitter; Transmitting Frequency: 2.4GHz band Power Requirement: Four AA cells Current Drain: 100mA or less Transmission Antenna: Dipole (built in) Communication Method: Two way T-FHSS, one way S-FHSS, FHSS operating system R203GF Receiver, FUTL7603; DIMENSIONS: 1.54 x 0.91 x 0.33" (39 x 26 x 10mm) Weight: 0.28oz (8g) Operating Voltage: 4.8 - 7.4V (shared with servo) Battery Fail Safe Voltage: 3.8V* Current Drain: 30mA at no signal *Battery fail safe voltage is set for 4-cell NiCd/ NiMh battery. Battery F/S does not work properly when other type of battery is used Antenna length: 7.5" (190.5mm)

COMMENTS:
For an optional charger, you can use FUTM1832, or if you already have a charger and need a charge lead Futaba Support can sell you part number- HSP29615. (requires soldering on the correct charger plugs)