SNZB-01P

【Custom Button Action】You can customize the button actions as you want. Control multiple devices by single press, double press, and long press.

【Zigbee 3.0 Compatible】Supports Zigbee hubs using the Zigbee 3.0 protocol, and theoretically supports adding to any Zigbee hub developed in accordance with Zigbee 3.0 protocols. Like SONOFF NSPanel Pro, ZB Bridge Pro, and ZBDongle-E.

【Trigger Alexa Routines】Trigger Alexa Routines with the press of the wireless switch (requires SONOFF Zigbee hub).

【Emergency Button】SNZB-01P can be used as an emergency button when an emergency occurs, your family can press the button to send an alert notification to your phone.

【5 Years Battery Life】Powered by a CR2477 battery. *The battery life data is obtained from SONOFF’s internal laboratory, please refer to the actual use.

Note : SNZB-01P needs to be used with Zigbee 3.0 Hub.

Add SNZB-01P on the gateway

● When the device is used for the first time after being powered on, it will enter the network distribution state by default, and the device indicator light will flash slowly.
● If it is not the first time, press and hold the device for 5s to enter the network configuration state.
       *If no pairing is performed with the gateway within 3 minutes, the device will exit the network configuration state. If you need to configure the network again, please press and hold the device network configuration button for 5 seconds until the device indicator light flashes slowly.

Support gateway

1. Sonoff ZBBridge
2. Sonoff ZBBridge-P
3. NSPanel PRO
4. Sonoff AIBridge
5. Sonoff Dongel (HA&OpenHAB)# supports Zigbee2mqtt (ZHA)
6. Samsung SmartThings hub V3
7. Samsung AeoTec Smart Home Hub V3

Common Problem

1.How many times can SNZB-01P be pressed?
● About 100,000 times

2. Are there any sensor components inside SNZB-01P?
There are no sensor components inside SNZB-01P. It is realized through structure and hardware buttons, which are rebound buttons similar to the picture below.