This product is a direct digital frequency synthesizer (DDS) with a built-in 10-bit , low consumption, and with a 28-bit frequency register. It can realize high-performance sinewave and trianglewave output, and can achieve 0.004 Hz resolution when the rate is 1MHz.
Features:
The module is powered by 5V Type-C, the user can choose the desired chip, set the desired point frequency, sweeping starts frequency, sweeping stop frequency, and the sweeping-step frequency.
You can set the reference frequency and change the output waveform signal. When connecting to an external , you need to input the corresponding external frequency.
In Waveform, you can output Sine (sinewave) signal, (squarewave) signal, Triangular (triangularwave) Signal.
In the main interface, you can choose Point (point frequency) output mode, Sweeping (sweeping frequency) output mode, and Stop (stop) output mode.
The module supports PC control, and the PC control operation is the same as the full-screen touching screen operation.
The -and- operation is simple and easy to carry, and it can also realize point frequency and sweeping frequency work, and full touching screen operation.
Specifications:
Name: Signal Generator
Material: printed circuit board
supplys: DC5V
resolution bit: 10
Output frequency ranges: ≤3MHz
Output amplitude: about 0.6Vpp sinewave and triangular waves; about 3Vpp waves
Output impedance: 200ohm
Output interface: SMA
Output channel: 1 channel
Item size: 103 * 63 * 17mm / 4.06 * 2.48 * 0.67in
Item weight: 89g / 3.14ounce
Package size: 125 * 103 * 40mm / 4.92 * 4.06 * 1.57in
Package weight: 116g / 4.09ounce
Packing List:
1 * Signal Generator
1 * Type-C Cable
Features:
The module is powered by 5V Type-C, the user can choose the desired chip, set the desired point frequency, sweeping starts frequency, sweeping stop frequency, and the sweeping-step frequency.
You can set the reference frequency and change the output waveform signal. When connecting to an external , you need to input the corresponding external frequency.
In Waveform, you can output Sine (sinewave) signal, (squarewave) signal, Triangular (triangularwave) Signal.
In the main interface, you can choose Point (point frequency) output mode, Sweeping (sweeping frequency) output mode, and Stop (stop) output mode.
The module supports PC control, and the PC control operation is the same as the full-screen touching screen operation.
The -and- operation is simple and easy to carry, and it can also realize point frequency and sweeping frequency work, and full touching screen operation.
Specifications:
Name: Signal Generator
Material: printed circuit board
supplys: DC5V
resolution bit: 10
Output frequency ranges: ≤3MHz
Output amplitude: about 0.6Vpp sinewave and triangular waves; about 3Vpp waves
Output impedance: 200ohm
Output interface: SMA
Output channel: 1 channel
Item size: 103 * 63 * 17mm / 4.06 * 2.48 * 0.67in
Item weight: 89g / 3.14ounce
Package size: 125 * 103 * 40mm / 4.92 * 4.06 * 1.57in
Package weight: 116g / 4.09ounce
Packing List:
1 * Signal Generator
1 * Type-C Cable