Fitment：
Fits Ford : (Please check your vehicle compatibility before buying)
1999-2010 Ford F250 F350 Super Duty with 3-1/2 inch diameter axle tube (NOT fit models equipped with overload springs or dually models);
2011-2022 Ford F250 F350 with 3-1/2 inch diameter axle tube (4wd only) (Exc. Airbag Suspension Systems; Exc. Factory Overload Springs) not fit 2-PC DRIVE SHAFT.
Specification:
Auto Part Position: Rear
Material: Alloy Steel
Lifting Height: 2 Inches
Block width: 70mm
U bolts thread Pitch: M16X1.5
U bolts length: 15.55"
Included Components: 2 x rear lift blocks, 4 x extended u-bolts and instructions
Please note:
Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry.
This lift kit will raise the rear of your Ford by a true 2".
Profession installation is highly recommended.
Description:
2'' height block to replace the factory block to achieve different rear lifting
Powder coated black Tapered Fabricated Steel with cross support better than others' casting iron and aluminum blocks.
Internal Reinforced cross ensure stronger support.
The leaf springs U bolts is Longer than original bolts with 10.9 grades and M16x1.5 thread pitch, more suitable for tuner.(If they are too long, you could cut them as needed.)
Benefits : Maintain factory ride quality; Increased ground clearance; Levels the front with the rear; Fit larger rims and tires.easy to be installen in about 1 hours.
Perfect solution for towing and hauling, An alignment recommended after install
- Please check the compatible vehicles below.
- Please check the size before you buy.
- There may be some deviation in manual measurement data
- One year warranty and USA warehouse
A new return is considered a brand new item that you ended up not needing or perhaps you purchased incorrectly for your specific vehicle.
Please keep in mind that spending time before purchasing the part to confirm it is indeed exactly what you need can help prevent you from ordering the wrong part.
Please remember to email us which warehouse to send the item back before return. And all returns must be shipped back in their original factory packaging.
Shipping Damage
Shipping damage is any item/package suspected of being broken or damaged in anyway during the shipping process. We purchase full insurance for this, however the damage must be reported to us within 3 days of receiving the package.
1 Year warranty against manufacture defect.
Replace/return are available if buyers receive wrong/damaged/defective items.
For replacement or return , buyer should keep the item in acceptable packing.
Before replace or return ,buyer should submit proof to us by pics if possible.
Anyway ,by nice communications ,we can find a way to make you satisfied
Very appreciated for your support. I hope you are happy with your purchase.
We maintain high standards of excellence and strive for 100% customer satisfaction! 
Feedback is very important to us.
We request that you contact us immediately BEFORE you give us 
or 
feedback, so that we can satisfactorily address your concerns.
If you have any problem, please feel free to contact us via ebay message, we will reply your email within 24 hours (except weekends and holidays). We will do our best to solve your problem as soon as possible.
We appreciate your continued patience and willingness to work with us. Thank you for choosing us and have a great day!
Car repairFitment：
Fits Ford : (Please check your vehicle compatibility before buying)
1999-2010 Ford F250 F350 Super Duty with 3-1/2 inch diameter axle tube (NOT fit models equipped with overload springs or dually models);
2011-2022 Ford F250 F350 with 3-1/2 inch diameter axle tube (4wd only) (Exc. Airbag Suspension Systems; Exc. Factory Overload Springs) not fit 2-PC DRIVE SHAFT.
Specification:
Auto Part Position: Rear
Material: Alloy Steel
Lifting Height: 2 Inches
Block width: 70mm
U bolts thread Pitch: M16X1.5
U bolts length: 15.55"
Included Components: 2 x rear lift blocks, 4 x extended u-bolts and instructions
Please note:
Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry.
This lift kit will raise the rear of your Ford by a true 2".
Profession installation is highly recommended.
Description:
2'' height block to replace the factory block to achieve different rear lifting
Powder coated black Tapered Fabricated Steel with cross support better than others' casting iron and aluminum blocks.
Internal Reinforced cross ensure stronger support.
The leaf springs U bolts is Longer than original bolts with 10.9 grades and M16x1.5 thread pitch, more suitable for tuner.(If they are too long, you could cut them as needed.)
Benefits : Maintain factory ride quality; Increased ground clearance; Levels the front with the rear; Fit larger rims and tires.easy to be installen in about 1 hours.
Perfect solution for towing and hauling, An alignment recommended after install