Material: plastic, alloy
Size: 5.4 x 2.9 x 1.4 (cm)
Function:
Note that the remote control is not scrollable and can be used,
The remote control cannot be used even with scrolling codes (scrolling codes are chips with confidentiality agreements)
The latest IC programming code to prevent accidental removal.
This is a fixed frequency remote 433MHz clone used to replicate 99.99% of common fixed and learning code remote.
Clone up to 2 remote control signals from 2 different remote controls
The remote control has a wide range of uses, mainly for remote control of electric retractable doors, remote control railings, remote control roller shutter doors, garage doors, remote control LED lights, remote control fireworks igniters, remote control passenger doors, anti-theft alarms, electric door alarms, MP3 motorcycle anti-theft alarms, etc. In addition, it can also be used as a 4-channel wireless control machine for automobiles (with external remote control roof and external remote control products), heating systems, home automation, etc.
Parameters:
Working voltage: DC12V (built-in 27A12V battery)
Working current: 10mA
Radiation power: 10mw
Transmission frequency: 433MHz
Transmission distance: 50-100M (in open areas, the sensitivity of the receiving equipment is negative 100dbm)
Encoder type: fixed encoding. Learning Code
Accessory list: 1 x copy remote control
Other instructions:
How to program:
1. Delete the historical code of the replication machine.
Press the A and B buttons continuously until the LED flashes 3 times.
Leave the B key (hold down the A key), slowly press the B key 3 times, and the LED will flash.
Leave the A key to clear the code gap.
If the clear code is correct, please short press any key. The light will not flash.
If the indicator light flashes, the release process of short pressing any button is incorrect. Please retry the sharing process.
2. Copy the code from the original site.
Place the cloned remote control side by side with the original remote control. Ensure they are in contact.
Press and hold one button on the original remote control and one button on the clone remote control until the remote control flashes continuously on the clone LED.
The red LED will flash rapidly three times, then stop for one second, and then flash steadily.
Release the two buttons. Programming successful. Copy other buttons in the same way