Marine Boat RV Truck Fuel Water Tank Level Sensor Sender Sending Unit 0-190 ohms

100-1000mm Marine Fuel Sending Units Level Sender 0-190ohms for Boat Car Truck

 

NOTES: This is an optional listing, please confirm the selected item before placing the order.

 

Fuel Gauge Connection:

Black: Ground(-)
Red: 9-30VDC(+)
Blue: signal Input Connect the signal of the fuel sender
Yellow: Backlight(+)
White: Reserve(If need 0-190ohms, no need connect the white cable, if needed 240-33ohms, please take it to connect the negative)

Warning Alarm: When fuel level low than 13%, the warning light will flash.

Sender connection:

Brown: Signal output
Blue: Negative(-)

 

ATTENTION:

NOTES: 0-190ohms fuel level sensor only fit for 0-190ohms fuel gauge
NOTES: 240-33ohms fuel level sensor only fit for 240-33ohms fuel gauge
NOTES: 0-90ohms fuel level sensor only fit for 0-90ohms fuel gauge

Please double check carefully the resistance of your fuel sensor before buying.

 

 

Description:

 

  • Suitable for truck, generators/gen set, bus and marine field.
  • Widely used in fuel, waste water.
  • Reed switch, steady output signal.
  • Simple and stronge structure , Advanced corrosion resistance.
  • Long using life, anti-vibration,anti-explosion.
  • High quality fuel level senser.
  • Economical level sensing solution, long service lifespan.
 
Water/Fuel Level Gauge Specification:
 
  • Size: dia 52mm
  • Backlight: Red
  • Indicating Range:E- F
  • Working voltage: 9-32V
  • Waterproof rating: IP67
  • Material: Stainless steel
  • Signal: 0-190 ohms
  • Working Temperature: -30~+75℃
  • Storage Temperature: -40~+85℃
  • Color: Black/White
 
Package:
 
  • 1 x Fuel Level Gauge
  • 1 x Fuel level Sensor
  • 1 x Instruction manual
  • 1 x Wiring harness

 

Sensor Specification:
 
  • Please attention we have 6 models Level Sensor Length Range for choice:
  • 150mm, 175mm, 200mm, 225mm, 250mm,275mm,300mm,350mm,400mm
  • Material: 316 Stainless Steel
  • Protection Rank: IP67
  • Resistance output signal: 0-190 ohms (Standard European)
  • Operational Temperature: -40°F ~ +185°F (-40℃ ~ +85℃)
  • Screw size: M5*16
  • Level Sensor Support Water Level Gauge and Fuel Level Gauge
 
 
INSTRUCTIONS
 
  • Blue - Ground
  • Brown- connect to instrument signal line
  • The sensor can not be connected to the power supply, can not be connected to the positive electrode, does not need to be connected to the power supply, it is connected with the gauge signal directly
  • Empty oil level  0 ohms
  • Full oil level 190 ohms

Note:
  • We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
  • Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)
PushAuction